oil-hole screw in Vietnamese

@Chuyên ngành kỹ thuật
@Lĩnh vực: cơ khí & công trình
-nút có ren lỗ đầu

Sentence patterns related to "oil-hole screw"

1. Oil cooler oil filter oil from the oil injection hole after the screw into the screw goes into.

2. An adjustment collar is screwed into the adjustment screw hole.

3. The electromagnetic actuator is provided with an adjustment screw hole.

4. The screw penetration hole has a diameter which is larger than the maximum diameter of the thread of the screw and the center hole formed in the washer.

5. Another connector screw hole (6, 7) is disposed in each of the two half flanges (2, 3), said screw hole being set at a 90° angle to the first.

6. Oil gushed from the hole in the tanker.

7. Cannulated Drill Bits are individually sterile packaged and intended used for preparing a pilot hole and the gliding hole for Cannulated screw insertion

8. A screw on Oil Cartridge vaporizer is a device that allows for the Cartridge to screw directly into the battery

9. The threaded stud (32) of the base screw (3) engages in the internal screw thread hole (14) provided in the implant (1) and draws the abutment (2) into the locating hole (12) of the implant (1).

10. Oil was trickling from a tiny hole in the tank.

11. The screw-plug has a screwdriver slot and the smooth disc has a central lifting hole.

12. The screw plug has a screwdriver slot and the smooth disc has a central lifting hole.

13. The screw plug has a screwdriver slot and the smooth disc has a central lifting hole

14. The screw-plug has a screwdriver slot and the smooth disc has a central lifting hole

15. The Angulated screw channel (ASC) provides the option to place the screw access hole anywhere between 0° to 25° in a 360° radius.

16. The oil well is created by drilling a long hole into the earth with an oil rig.

Các giếng dầu được tạo ra bằng cách khoan một lỗ dài vào trái đất với một giàn khoan dầu.

17. The Angulated screw channel (ASC) gives you the option to place the screw access hole anywhere between 0° to 25° in a 360° radius

18. The Angulated screw channel (ASC) gives you the option to place the screw access hole anywhere between 0° to 25° in a 360° radius

19. This abutment holder have crucially incised annular club at its bottom and snap fits into screw hole of abutment.

20. The reduction plate includes, on a first side of the reduction plate, a travel slot and a screw hole.

21. The oil leaked away because there was a small hole in the tank.

22. Countersunk magnet is special type of disc/block/ring/arc magnet (neodymium, ferrite, smco) with a hole fit for screw

23. Oil-Flooded Rotary Screw Air Compressors Ingersoll Rand oil-flooded rotary screw air Compressors offer businesses the very best combination of time-proven designs and technologies plus new, advanced features that ensure the highest levels of reliability, efficiency, and productivity available

24. The oil is not liquid. You can't just drill a hole and pump it out.

Dầu ở đây không phải ở dạng lỏng; bạn không thể cứ khoan một cái lỗ rồi bơm nó lên.

25. Counterbores Used to enlarge a portion of a pre-existing hole, hiding the head of a screw or seat for a nut