oblique cross section area in Vietnamese

@Chuyên ngành kỹ thuật
-diện tích mặt cắt ngang

Sentence patterns related to "oblique cross section area"

1. A connection is created across a very large area relative to the cross section of the support by extending the abutment surfaces at said oblique angle, ensuring an extremely stable connection between the two parts.

2. Alternatively, the device (1) includes a bent pipe section having a varying cross-sectional flow area (13).

3. Brenner Tunnel , cross-border section

4. Cross section of a cell

5. Cross section of the Paris sewers

6. --Of circular or polygonal cross-section:

7. | – – –Of circular or polygonal cross-section: |

8. The contact zone (22) contains a bracing area provided on the reverse side of the retaining section (7), which includes at least one oblique section (34) extending both outwards at an angle and backwards.

9. The stereoscopic oblique-angle instrument is adjusted to the operation-area.

10. A center oblique airfoil section (25) connects the forward and aft swept wing segments.

11. − Other, welded, of non-circular cross-section: |

12. – Other, welded, of non-circular cross-section:

13. A cross section of the filter chambers.

14. The girder is square in cross-section.

15. -Other, welded, of non-circular cross-section:

16. Loader comprising arm section and parallel struts with an open cross section

17. -Other, welded, of non-circular cross-section

18. – Other, welded, of non-circular cross-section: |

19. Three kinds of flight cross sections were researched including rectangular section, hackle section and trapezoid section.

20. Said nozzle has an entry cross-section (4), an adjoining acceleration zone (2), which narrows to a minimum cross-section (5) and leads into an exit zone (3) with a terminal exit cross-section (6).

21. Cross section of crosshatched collagen and elastic fibers

22. 7306.60 // - Other, welded, of non-circular cross-section

23. Consider a beam with a uniform cross section.

Xét một chùm với một lát cắt ngang thống nhất.

24. – Other, welded, of circular cross-section, of stainless steel:

25. The cross-section must not exhibit any abrupt alteration