molding shrinkage in Vietnamese
@Chuyên ngành kỹ thuật
-độ co giãn của khuô
Sentence patterns related to "molding shrinkage"
1. The mechanism are concluded that concrete has three inchoate shrinkage properties including plastic shrinkage cracking, dry shrinkage and self shrinkage.
2. Wall moulding panels door molding kit wall molding kit door moulding kit wall moulding kit peel stick molding peel stick molding self-Adhering molding applied moulding applied molding picture frame molding door moulding panels door molding panels wainscotting panels wainscoting panels door decal architectural applique raised panels doors wall trimUpgrade plain, flat panel doors quickly and
3. Plastic injection molding is an important method of molding, which apply mainly to the thermoplastic plastic molding, can be a complex shape of the precision molding plastic parts.
4. Shock absorbing device for molding shaft of tube molding machine
5. Ancillary molding automation equipment for handling molded parts or supporting molding operations
6. Shrinkage and dispersed shrinkage are the special waster of ductile iron.
7. • Shrinkage results / photographs
8. Shrinkage rate (%) = (1-V2/V1)×100) (V1 is the bead volume before shrinkage, V2 is the bead volume after shrinkage)
9. Shrinkage reducing agent can reduce dry shrinkage of cement-stabilized macadam greatly.
10. shrinkage when cooked
11. • Share Shrinkage Numbers
12. House moldings that resemble the Battlement pattern are often called crenelated molding or embattled molding
13. High shrinkage polyester fibres
14. Low shrinkage binder system
15. Expansion extrusion molding, extrusion molding apparatus therefor, and process for producing pressure-sensitive adhesive sheet.
16. Bulk Molding Compound is specifically formulated for injection molding of automotive headlamp reflector applications.
17. Baroque bas-reliefs on the wall decorative elements on the wall molding #Basreliefs #decorative_elements #molding #reliefs
18. Low shrinkage dielectric films
19. After shrinkage, the film can be inhibited from suffering shrinkage in the longitudinal stretch direction.
20. Injection molding machines and methods for accounting for changes in material properties during injection molding runs
21. Adhesiveness is a property of molding sand to get the stick or adhere to foreign material such sticking of molding sand with the inner wall of molding box
22. You must allow for shrinkage.
23. Atrophia bulbi due to shrinkage
24. High shrinkage propylene-based films
25. Beading definition is - a beaded molding