metal vapour laser in Vietnamese

@Chuyên ngành kỹ thuật
@Lĩnh vực: điện tử & viễn thông
-laze hơi kim loại

Sentence patterns related to "metal vapour laser"

1. Equipment and components, specially designed or prepared for atomic vapour “laser” isotope separation process (AVLIS), as follows:

2. 3pcs Silver Metal Laser Diode Housing 12x40mm for 5.6mm To-18 Laser Diode with 200-1100nm Collimating Lens.

3. Process for remelting metal surfaces by laser, in particular cam shafts.

4. China best China laser machines with good quality and high speed from Bogong MACHINERY, Bogong is a China manufacturer of laser marking machine, CO2 laser engraving and cutting machine, fiber laser cutting machine, and laser welding machine, Laser celeaning machine, laser welding machine, and metal laser engraving machine

5. Some SLS machines use single-component powder, such as direct metal laser sintering.

Một số máy SLS sử dụng bột một thành phần, chẳng hạn như thiêu kết laser kim loại trực tiếp.

6. Method for forming fine conductive pattern using metal nanoink for laser patterning process

7. Solomark Collimation Eyepiece - 1.25Inch Cheshire Without Laser for Newtonian Telescopes and Reflectors - Metal, Long

8. In powder-fed directed-energy deposition, a high-power laser is used to melt metal powder supplied to the focus of the laser beam.

Trong quá trình lắng đọng năng lượng trực tiếp dạng cấp bột, một laser công suất cao được sử dụng để làm tan chảy bột kim loại được cung cấp cho trọng tâm của chùm laser.

9. Laser-based wirefeed systems, such as Laser Metal Deposition-wire (LMD-w), feed wire through a nozzle that is melted by a laser using inert gas shielding in either an open environment (gas surrounding the laser), or in a sealed chamber.

Các hệ thống cấp dây dựa trên laser, chẳng hạn như dây kim loại bằng laser (LMD-w), dây dẫn qua vòi phun được làm nóng chảy bằng laser sử dụng khí trơ che chắn trong môi trường mở (khí xung quanh laser), hoặc trong buồng kín.

10. Metal Acetylides and carbides Several of the mono- and di-alkali metal Acetylides and copper Acetylides ignite at ambient temperature or on slight warming, with either liquid or vapour

11. Gasoline, vapour-recovery;

12. At all vapour pressures and compositions below it, the mixture is a vapour.

13. Machines for treating, surface treatment, machining, cleaning, polishing and forming metal, metal articles and workpieces, including by shot peening, hammer peening, laser peening and abrasive blasting

14. The laser energy is intense enough to permit full melting (welding) of the particles to form solid metal.

Năng lượng laser đủ mạnh để cho phép sự tan chảy hoàn toàn (hàn) của các hạt tạo thành kim loại rắn.

15. Other options such as metal stent inserts, brachytherapy or photodynamic laser therapy (PDT) are reserved for special cases.

16. Now, highly sensitive measurement of magnetic fields is possible based on optical techniques applied to high-density alkali metal atoms in a vapour.

17. Adige-SYS SpA: Manufactures 'mixed' cutting laser-cutting systems for pipes and sheet metal, plants for laser machining large pipes and lines for cutting and end cutting of tubes and bars

18. Absolute humidity is the mass of water vapour in a unit volume (this is water vapour density, commonly measured as grams of water vapour per cubic metre).

19. The vapour-compression cycle (20) of another example is a standard vapour-absorption refrigeration cycle.

20. 3(f) Water vapour permeability

21. Laser anemometers, laser Doppler anemometers, laser Doppler Velocimeters (LDVs), laser radars (lidars) for wind speed measurement, laser based wind speed measurement apparatus, apparatus for measuring wind speed using Infra-Red (IR) radiation, optical fibre based laser anemometers, anemometers, ground based laser anemometers, vehicle mountable laser anemometers, buoy mountable laser anemometers, ship mountable laser anemometers, aircraft mountable laser anemometers, airborne laser anemometers, laser anemometers for true air-speed measurements, laser anemometers for air turbulence measurements, laser anemometers for measuring wind speed in a wind tunnel and wind turbine mountable laser anemometers

22. A mixture of clean dry air and water vapour for which the vapour pressure (density) is less than the saturated vapour pressure (density) at the same temperature.

23. Glove Box and Metal Organic Chemical Vapour Deposition Keeping samples clean is crucial for NCR scientists developing semiconductor materials for use in advanced electronic devices.

24. The particles then form a vapour.

25. Collimating lenses product line: Laser Collimating lens, Laser collimation lens, Laser collimator lens