maximum time interval error (mtie) in Vietnamese

@Chuyên ngành kỹ thuật
-lỗi thời khoảng tối đa

Sentence patterns related to "maximum time interval error mtie"

1. ‘This error can be reduced substantially by choosing the Coelostat position and time interval.’

2. The maximum permissible error for alcoholometers and alcohol hydrometers shall be: - for Class I, ± one half scale interval for each reading measured,

3. The maximum admissible error is em # %

4. The maximum admissible error is em = ± # %. "

5. The maximum admissible error is em = 3%.

6. The maximum admissible error is em = ± 3%."

7. absolute value of the maximum permissible error

8. Bioassay interval - The Bioassay interval is the maximum time that may elapse between Bioassays that will assure detection of the verification level for a given nuclide and assay method

9. Date/Time Error

Lỗi múi giờNAME OF TRANSLATORS

10. Error setting new Time Zone.

11. Tracking shall have a position error which shall be less than # metres, with a confidence interval of # %

12. The absolute margin of error mentioned in point 3 is the half-length of the 95 % confidence interval.

13. The time constant of the integrator is altered in such a way that the altitude is adapted depending on the maximum possible altitude error.

14. Between two Aperiodic real-time tasks the time interval may be even zero

15. However, the maximum permissible absolute error cannot be less than the values given below :

16. The results show an average recovery of 99.8%, the maximum absolute error being ± 2%.

17. -the absolute value of the maximum permissible error for the minimum measured quantity (Emin).

18. The results show an average recovery of 98.9%, the maximum absolute error being ±2%.

19. - the greater of the two values: - absolute value of the maximum permissible error, or

20. Still recommend removal of Absorbable sutures at the appropriate time interval

21. Brink: an interval of time just before the onset of something.

22. -the absolute value of the maximum permissible error given in Table 3 or Table 4.

23. But with the local maximum induced by error may occur while the global optimization performed.

24. 20 A new integration formula and its local truncation error are presented on the basis of non-iso-interval Newton interpolation.

25. New feature – Calculate the amount of units for the time interval (salary, distance, etc) Time Calculator Cardamon