load test at the site in Vietnamese

@Chuyên ngành kỹ thuật
@Lĩnh vực: xây dựng
-thử tải ở hiện trường
@Chuyên ngành kỹ thuật
@Lĩnh vực: xây dựng
-thử tải ở hiện trường

Sentence patterns related to "load test at the site"

1. The load is tipped out at the dumping site.

2. Apply the test load at a rate not to exceed # mm/min until failure. Record the maximum load

3. Test your site

4. Test your site.

5. The FlexPDE program was used to compare deflection predictions with actual plate-load test data from a site near Québec City.

6. The present invention also relates to a vertical load-carrying test method using this vertical load-carrying test apparatus.

7. Stress Test Execution Scripts & Load Clients

8. Create an effective mobile site | Test your site

9. Test data is obtained, and from a complete load-deformation curve it is possible to compute the Compressive stress at any load (such as Compressive stress at proportional-limit load or Compressive strength at maximum load) and to compute the effective modulus of elasticity.

10. On the test site ... the acceleration section.

11. The Statnamic (STN) load test is characterized by a relatively long duration and low pile velocity and acceleration compared with the dynamic load test.

12. Test your link on the developer site

13. All provisions defined in (a) shall be met at the start of the full load acceleration test run.

14. The H-6 was used to drop nine nuclear devices at the Lop Nur test site.

15. A load test is usually conducted to understand the behaviour of the system under a specific expected load.

16. Regulation No. 58 specifies neither a uniform load test nor an energy absorption test.

17. I still need to load the exploit, need to test it...

18. At this location a technician used acoustical test equipment to determine the sound quality around the site.

19. Key words: pile foundation, model test, layered soil, eccentric load, inclined load, sand, clay, analysis, bearing capacity.

20. Load application is done via the tried and tested closed control loop method facilitating a larger test load range.

21. With an alternating test force the resulting load is equal to zero.

22. The YO - YO test can estimate the players capacity of repeat intermittent load.

23. The alternator shall be subject to no other electrical load during the test.

24. Key words: bearing capacity, clay, displacements, eccentric load, horizontal load, lateral pressure, layered system, model test, pile, sand.

25. The alternator must be subject to no other electrical load during the test.