lath in Vietnamese

@lath /lɑ:θ/
danh từ
- lati, mèn, thanh gỗ mỏng (để lát trần nhà...)
!as thin as a lath
- gầy như cái que (người)
ngoại động từ
- lát bằng lati
@Chuyên ngành kỹ thuật
-bản
-nan tre lati
-mia
-tấm ván
-thanh
-thước đo
@Lĩnh vực: xây dựng
-đặt lati
-lati
-lati trát vữa
-nan gõ lati
-mè
-thanh cốt vách
@Chuyên ngành kỹ thuật
-bản
-nan tre lati
-mia
-tấm ván
-thanh
-thước đo
@Lĩnh vực: xây dựng
-đặt lati
-lati
-lati trát vữa
-nan gõ lati
-mè
-thanh cốt vách

Sentence patterns related to "lath"

1. He's as thin as a lath.

2. you'll need corrosion-resistant metal stucco lath.

3. A as thin as a lath women.

4. X precipitate phase and the lath structure.

5. The little boy was as thin as a lath.

6. Long strips of ceiling lath sheared down into the rooms.

7. Lath Length: up to 2440 mm or customized according to customer requirements.

8. In welding zone the lath shape microstructure reduces, and equiaxed microstructure increases.

9. Metal lath and beads - Definitions, requirements and test methods - Part 2: External rendering

10. Granular or lath be-bainite was formed in as-welded metal.

11. Metal lath and beads — Definitions, requirements and test methods — Part 2: External rendering

12. I was shocked at his appearanceso grey - faced , and thin as a lath.

13. Bandsawed, KILN DRIED LUMBER • SASH, DOORS, MILL WORK WASHINGTON FIR LATH NO

14. He devised metal lath and corner trim long before it became standard.

15. Lath-shaped Antigorite fibres with transitions to fine fibrils (from keelinG et al

16. 13 The lath like carbide free ferrite and retained austenite has been observed by transmission electron microscope.

17. Building materials (non-metallic) for shielding electric and/or magnetic fields, in particular cloth lath

18. Lath-shaped plagioclase is Albite in composition and pyroxene has been mainly replaced by tremolite

19. We'll have no Cupid hoodwink'd with a scarf, Bearing a Tartar's painted bow of lath,

20. Alternatively a layer of aluminium-coated adhesive cloth tape is directly attached to the underside of the lath.

21. The thickness of the wood lath Clean Crawls uses is typically 50% to 100% thicker than the standard wood

22. I found this lath back by far the most comfortable and remarkable, its size being ideal for my build.

23. Roofing battens or Battening, also called roofing lath, are used to provide the fixing point for roofing materials such as shingles or tiles

24. Roofing Battens or battening, also called roofing lath, are used to provide the fixing point for roofing materials such as shingles or tiles

25. But these are all landsmen; of week days pent up in lath and plaster -- tied to counters, nailed to benches, clinched to desks.

Nhưng đây là tất cả các landsmen, các ngày trong tuần bị dồn nén trong gươm và thạch cao gắn liền với quầy, bị đóng đinh trên băng ghế giành cho bàn làm việc.

26. Clean Crawls again goes above and beyond by purchasing specially-cut thick lath that is also longer than what others use

27. A traditional Adhered masonry system includes a substrate with one or two layers of a weather resistant barrier (WRB) on the substrate’s outside face, a metal lath securely fastened to the substrate, a “scratch” or base mortar coat that completely encapsulates the metal lath, a top mortar coat, and a masonry veneer Adhered by a top coat to the scratch coat.

28. When B-III and B-II type bainite, which precipitated Acicularly so as to partition prior austenite grains, associated with lath martensite, a detrimental effect was found on the strength and

29. “The furnace room is to be Ceiled with metal lath and metal doors into this room will be substituted for those now in use, thus rendering the furnace room practically fire proof.

30. Roofing battens or Battening, also called roofing lath, are used to provide the fixing point for roofing materials such as shingles or tiles.The spacing of the battens on the trusses or rafters depend on the type of roofing material and are applied horizontally like purlins.

31. Roofing Battens or battening, also called roofing lath, are used to provide the fixing point for roofing materials such as shingles or tiles.The spacing of the Battens on the trusses or rafters depend on the type of roofing material and are applied horizontally like purlins.

32. These weld metals have microstructures of acicular ferrite (16') interspersed in a hard constituent (11'), such as lath martensite, yield strengths of at least about 690 MPa (100ksi), and DBTTs lower than about -50°C (-58°F) as measured by a Charpy energy versus temperature curve.