impact tensile stress in Vietnamese

@Chuyên ngành kỹ thuật
@Lĩnh vực: cơ khí & công trình
-ứng suất kéo khi va chạm

Sentence patterns related to "impact tensile stress"

1. Portable sander having novel abrasive sheet tensile stress

2. minimum elongation at fracture of the metal chosen under tensile stress in %.

3. As it only takes place under tensile stress, the plane of the Crazing …

4. A tensile stress opens the crack and pulls it through the slide resulting in fracture.

5. The compressive surface stress is tough in the glass because any bending load has to overcome quenched compressive stress before there's a net tensile stress on the surface.

6. Conversely, low to moderate tensile strain and stress is associated with direct repair, or intramembranous ossification.

7. 11 The condition of uniaxial stress is approximated in prismatic bars subjected to pure axial tensile.

8. 29 The condition of uniaxial stress is closely approximated in prismatic bars subjected to pure axial tensile.

9. The mechanical performance of Crazed polycarbonate was characterized by measuring the yield stress, elastic modulus, failure stress, and ductility for constant strain rate tensile tests.

10. 23 As with tensile and bend testing, torsion testing may be done under various stress or displacement programs.

11. ABS offers a good balance of impact, heat, chemical and abrasion resistance, dimensional stability, tensile strength, surface

12. Small probes of added shearing stress appeared to cause considerably more accumulated strain-hardening damage to a yield curve than small probes of added tensile stress.

13. CBM sealed condition is bad under neutral plane at axial part where shows tensile stress in syncline structure.

14. Testing of the material of construction in respect at least of yield stress, tensile strength, and permanent elongation at fracture

15. A special test series investigated the effect on adhesion of a tensile or compressive stress state in a polyethylene pile.

16. Testing of the material of construction in respect at least of yield stress, tensile strength, and permanent elongation at fracture;

17. Canniest edukacja Гъби to be packed flirt with tensile impact stress naimaku izjesti (v.) calma feto repo-ta-korektura za kontinuiranost liberalizacija tržišta naletjeti (na koga) synchronous machine strong arm, stout arm knavishness weak, lame einen Buckel machen (z.B

18. (a) Testing of the material of construction in respect at least of yield stress, tensile strength, and permanent elongation at fracture;

19. (a) testing of the material of construction in respect at least of yield stress, tensile strength, and permanent elongation at fracture;

20. Jointless, curved trusses also show tensile stresses or compressive stresses perpendicular to the grain, depending on the stress distribution The test results of the respective specimens give indication as to the suitability of the admissible tensile stress of 2.5 kp/cm2 specified in the draft of DIN 1052.

21. 29 Furthermore, at all impact power, the wear mechanism of the material changes distinctively with the time under the cyclic impact stress.

22. Tensile stress from the adductor muscles is held to be responsible for the formation of the bone-blade described as linea alba.

23. 26 When the surface braided angle is bigger, the stress-strain curve shows bilinear relation and tensile failure presents brittleness damage, respectively.

24. Atomized (finely powdered) metals can be added to Acraglas Gel to increase both tensile and compression strength, along with higher impact resistance.

25. The Biaxial tensile test is primarily performed in research and development to investigate defined stress values at the intersection point of the specimen