hot bending test in Vietnamese

@Chuyên ngành kỹ thuật
@Lĩnh vực: toán & tin
-sự thí nghiệm uốn mẫu nóng
@Lĩnh vực: xây dựng
-sự thí nghiệm uốn nóng

Sentence patterns related to "hot bending test"

Below are sample sentences containing the word "hot bending test" from the English - Vietnamese Dictionary. We can refer to these sentence patterns for sentences in case of finding sample sentences with the word "hot bending test", or refer to the context using the word "hot bending test" in the English - Vietnamese Dictionary.

1. Bending device for the working rolls of a hot-rolling frame

2. Alky is a genre-bending artist hailing from the Hot City (Phoenix, AZ)

3. Force versus angle requirement in static lower legform impactor bending certification test

4. This is demonstrated in the introduction by means of a bending strength test.

5. Wact,hot is the actual cycle work on the hot start test, kWh

6. SiC products thus have the highest cold-crushing strength, hot-bending strength and thermal conductivity.

7. Testing Hot Tub Alkalinity: Test your hot tub’s Alkalinity level at least twice per week, with a test kit or strips

8. Bending synonyms, Bending pronunciation, Bending translation, English dictionary definition of Bending

9. Points 4.5.1. (Strength test), 4.5.2. (Resistance to buckling) and 4.5.3. (Resistance to bending moment) only.

10. Principally, using a heat gun to bend a polycarbonate sheet is the same as hot line Bending

11. In addition to the adhesive test, bending strength, hardness, and colour of the modified timbers were examined.

12. Its test point is used to connect Hot Line Voltage Indicator.

13. Specimens that comprise or simulate special form radioactive material shall be subjected to the impact test, the percussion test, the bending test, and the heat test specified in 2.2.7.4.5 or alternative tests as authorised in 2.2.7.4.6.

14. Alternatives to the hot water bath test for small receptacles containing

15. Specimens that comprise or simulate special form radioactive material shall be subjected to the impact test, the percussion test, the bending test, and the heat test specified in 2.2.7.4.5 or alternative tests as authorized in 2.2.7.4.6.

16. is the actual cycle work of the hot start test, kWh

17. Accordingly, the nano-hole electrode shows a very low change in electrical resistance during a bending fatigue test.

18. Bending tool assembly for determining the bending angle

19. To this end the instrumented notched bar impact bending test is performed on unirradiated samples of the pressure vessel steel.

20. Bending angle measuring apparatus and method for measuring a bending angle by means of the bending angle measuring apparatus

21. Adequate correlation exists between bending MOE and bending strength with moisture content.

22. The Bending Iron maintains an even, thermostat-controlled heat for Bending wood

23. Bending results from a couple, or a Bending moment M, that is applied

24. An empty hose, at a length of approximately # m must be able to withstand # times the hereafter prescribed alternating-bending-test without breaking

25. An empty hose, at a length of approximately #,# m must be able to withstand # times the hereafter prescribed alternating-bending-test without breaking