horizontal position accuracy in Vietnamese

@Chuyên ngành kỹ thuật
@Lĩnh vực: cơ khí & công trình
-độ chính xác định vị nằm

Sentence patterns related to "horizontal position accuracy"

1. He shifted his position from the horizontal.

2. Rotate it slowly from the horizontal into a vertical position.

3. The burning position shall be horizontal within ± # ° with the lead wire down

4. An exceptionally fast horizontal machining center with dramatically enhanced high-speed performance, acceleration and accuracy.

5. Solar position tracking accuracy measurement system based on optical lens

6. The burning position shall be horizontal within ± 10 ° with the lead wire down.

7. Position acquisition point on the vessel in metre accuracy (e.g. GNSS antenna);

8. The GPS, for comparison, had a position accuracy of 20–30 m.

9. Returns the horizontal OpenGL raster position offset for a character in a Bitmapped font

10. Tighten the adjustment nut of the elbow with the lower arm in a horizontal position.

11. Tighten the adjustment nuts of the shoulder with the upper arm in a horizontal position.

12. Tighten the adjustment nut of the elbow with the lower arm in a horizontal position

13. Tighten the adjustment nuts of the shoulder with the upper arm in a horizontal position

14. The angular accuracy for horizontal bearing shall be in accordance with European Technical Specification (ETSI) EN 302 194.

15. The filament position accuracy of the HS5 is comparable with H4 and HS1.

16. Headforms: Accelerometer position accuracy under discussion in J and United States of America.

17. Therefore, ZNSHINE was not in a position to comment on the factual accuracy.

18. 4.6.3. Tighten the adjustment nuts of the shoulder with the upper arm in a horizontal position.

19. However, orifice plates mounted in a horizontal conduit can accumulate sediment, which may affect the accuracy of flow measurement.

20. Also, a horizontal width adjusting unit is disposed in the horizontal pipe between the vertical supporting units, and a forward and backward position adjusting unit is disposed between the sunblind unit and the horizontal pipe.

21. The images are returned in order of accuracy of the position information data source.

22. Note: This avoids GNSS jitter in position accuracy and raises confidence to nearly 100 %.

23. In this multilayer printed wiring board, the position accuracy of layers can be improved.

24. The end of the stick is pointed forward and maintained in a horizontal or slightly raised position.

25. The image is then inclined towards the predetermined viewing position at an acute angle to the horizontal.