diameter of the mouth in Vietnamese

@Chuyên ngành kỹ thuật
@Lĩnh vực: xây dựng
-đường kính miệng (lỗ khoan)

Sentence patterns related to "diameter of the mouth"

1. Tandoor Ataman Stands at over 3.5 feet tall, has a 12.5-inch wide mouth and a belly with a diameter of 24 inches

2. The diameter of a Counterbore is generally slightly larger than the fastener head’s diameter

3. The equatorial diameter exceeds the polar diameter by 26 miles.

4. The actual diameter of the various Buck shot pellets are: Buckshot Size Diameter (in inches)

5. What's the length of the diameter?

6. The pilot diameter should match the diameter of the hole the Counterbore will be used in.

7. The diameter of the flywheel housing;

8. For cutter hole diameter is the diameter of the cutter that the Arbor is compatible with

9. Anterio posterior diameter through the level of...

10. The Anteroposterior diameter (DAP) of the tooth is 25.7 mm and transverse diameter (DT) is 10.7 mm

11. Mouth of the Snake.

12. Increasing Anteroposterior diameter of thorax

13. In Bronchiectasis, the diameter of the Bronchi is

14. This is the diameter of the Counterbore's pilot, which should match the diameter of the hole the Counterbore will be used in

15. MICRO Collimator Length: 23.37mm (0.92”) Outside Diameter: 6.35mm (0.250”) Material: Stainless Steel Micro Collimator - COL005B0101 & COL005S0101 5mm Lens Diameter, NA of the fiber = 0.22 Beam Diameter (mm) Note: Collimator Divergence (milliradians) = Fiber Diameter (µ) / …

16. If the diameter of the circle is given, then the formula for Circumference is πd, where d is the diameter

17. The axis of a circle is its diameter.

18. Q: what is the size of the mini Blinis? A: The diameter of each mini blini is 1.6"/4 cm Q: What is the diameter A: The diameter is 1.6"/4 cm

19. The diameter and the circumference of a circle correlate.

20. Before profiling the jaws we will take a small cut on the inside diameter of the jaws equal to the plug diameter

Trước khi hồ sơ hàm chúng tôi sẽ có một cắt nhỏ ở bên trong đường kính của các hàm tương đương với đường kính cắm

21. The “actual external diameter” is the external diameter measured by the Technical Service prior to the test.

22. Burning mouth syndrome is characterized by long-lasting Burning sensations of the mouth

23. When diameter tolerance is specified on top of Circularity tolerance, then the Circularity tolerance is always less than the diameter tolerance.

24. Jaws holding the inside diameter of the work piece

Hàm giữ bên trong các đường kính của các mảnh làm việc

25. Aboral: 1 adj opposite to or away from the mouth “the Aboral surface of a starfish” Antonyms: oral of or involving the mouth or mouth region or the surface on which the mouth is located buccal oriented toward the inside of the cheek buccal lying within the mouth show more antonyms