compression modulus of deformation in Vietnamese

@Chuyên ngành kỹ thuật
@Lĩnh vực: xây dựng
-môđun biến dạng né

Sentence patterns related to "compression modulus of deformation"

1. Given the incompressibility of water, a relation between specific elastic storage, compressibility modulus and deformation modulus was inferred by applying current related formulas.

2. The elastic modulus is a measure of the resistance of a material to deformation under load.

3. The indenter, which has a finite elastic modulus , also undergoes elastic deformation under the applied load.

4. Spring, twist and, especially bow are strongly influenced by compression wood. Large amount of compression wood in sawn timber increases such deformation.

5. DermaMatrix Acellular Dermis demonstrates a higher tensile modulus, or greater resistance to stretching and deformation in laboratory testing.

6. It is pointed that 75 and 200 are the threshold temperatures of elastic modulus and uniaxial compression strength respectively.

7. Compression tests are not currently available for small aggregates comprised of soft, low-strength materials, and Young' s modulus is not quantified.

8. Axi-symmetric experimental deformation of galena, sphalerite and chalcopyrite produces similar pole figures with the (110) planes aligned normal to the compression axis.

9. The thorax compression criterion is determined by the absolute value of the thorax deformation, expressed in mm and measured according to paragraph # of Annex

10. The thorax compression criterion is determined by the absolute value of the thorax deformation, expressed in mm and measured according to paragraph #.#.# of annex

11. The thorax compression criterion is determined by the absolute value of the thorax deformation, expressed in mm and measured according to paragraph 5.2.3 of Annex 3.

12. The thorax compression criterion is determined by the absolute value of the thorax deformation, expressed in mm and measured according to paragraph 5.2.3. of Annex 3.

13. The thorax compression criterion is determined by the absolute value of the thorax deformation, expressed in mm and measured according to paragraph 5.2.3 of annex 3.

14. Compressibility: Compressibility: Bulk Modulus: where, k = Compressibility, B = Bulk Modulus

15. 3.1. The thorax compression criterion is determined by the absolute value of the thorax deformation, expressed in mm and measured according to paragraph 5.2.3. of Annex 3.

16. Modelling of deformation behaviour.

17. The thorax compression criterion is determined by the absolute value of the thorax deformation, expressed in mm and measured according to paragraph 5.2.3 of Appendix 1 to this Annex.

18. The equivalent elastic modulus was deduced by comprehensive considering deflection and elastic modulus.

19. The thorax compression criterion is determined by the absolute value of the thorax deformation, expressed in mm and measured according to paragraph 5.2.3 of appendix 1 to this Annex.

20. Based on the mathematical model, the influence of piston valve body's elastic modulus and deflected disc's elastic modulus are analyzed.

21. Butyl rubber Exxon™ Butyl rubber (BR) is a copolymer of isoButylene and isoprene with excellent weathering resistance, good aging resistance, low Mooney viscosity, vibration damping, low modulus, and low compression set

22. From our mechanical testing a prebending angle of 24° and a pretensioning force of 1500 N would allow the largest axial compression and show the most resistance against deformation in bending open.

23. Flakeboards were tested for internal bond strength, thickness swell, modulus of elasticity, modulus of rupture, and breaking strength in bending, after two severe accelerated aging tests.

24. Other applications of Crustal deformation include studying hydrologic changes such as draughts and groundwater extraction, and volcanic deformation.

25. These two parameters are nowadays called the modulus of compressibility.