metrological in Vietnamese
Tính từ
1. (thuộc) khoa đo lường
2. (thuộc) hệ thống đo lường
Sentence patterns related to "metrological"
1. Adaptation of the scope of the Directives and metrological checks
2. - a metrological examination of the meter, including built-in ancillary equipment.
3. However, it is necessary to adapt those modules in order to reflect specific aspects of metrological control.
4. the reproducibility of the metrological performances of produced instruments when properly adjusted using appropriate intended means, and
5. — the reproducibility of the metrological performances of produced instruments when properly adjusted using appropriate intended means, and
6. (b) the reproducibility of the metrological performances of produced instruments when properly adjusted using appropriate intended means, and;
7. "Sealable parameter": includes any calibration, configuration, or metrological parameter of an approved adjustments and sealable parameters accuracy of the device.
8. Metrological conditions are specified to provide a range of normal operating temperatures and to prevent abnormal readings due to extreme environmental conditions.
9. Efforts should be made to ensure methodological and metrological uniformity in surveillance and data processing; microbiological, and chemical-analytical work should be conducted by accredited laboratories with measurement quality control systems.
10. No Member State may refuse, prohibit or restrict the placing on the market or the use of any alcoholometer or alcohol hydrometer bearing the EEC pattern approval sign or EEC verification mark on the grounds of their metrological properties.
11. Whereas Council Directive 71/316/EEC of 26 July 1971 on the approximation of the laws of the Member States relating to common provisions for both measuring instruments and methods of metrological control (3) laid down the EEC pattern approval and EEC initial verification procedures ; whereas in accordance with that Directive it is necessary to lay down the technical requirements which the design and functioning of alcoholometers and alcohol hydrometers must satisfy in order to be freely imported, marketed and used after having undergone the requisite inspections and having been provided with the required marks and signs;
12. Whereas Council Directive 71/316/EEC of 26 July 1971 on the approximation of the laws of the Member States relating to common provisions for both measuring instruments and methods of metrological control ( 3 ) laid down the EEC pattern approval and EEC initial verification procedures; whereas in accordance with that Directive it is necessary to lay down the technical requirements which the design and functioning of alcoholometers and alcohol hydrometers must satisfy in order to be freely imported, marketed and used after having undergone the requisite inspections and having been provided with the required marks and signs;