corrugations in Korean

noun - corrugation
물결 주름: corrugation
물결 모양으로 만들기: corrugatio

Sentence patterns related to "corrugations"

Below are sample sentences containing the word "corrugations" from the English - Korean. We can refer to these sentence patterns for sentences in case of finding sample sentences with the word "corrugations", or refer to the context using the word "corrugations" in the English - Korean.

1. These same corrugations, however, result in a decrease in longitudinal bending strength.

2. Corrugated definition is - having Corrugations; also : made of corrugated material (such as cardboard)

3. Corrugated definition is - having corrugations; also : made of Corrugated material (such as cardboard)

4. In one system, the paneling is corrugated and the corrugations are ribbed with radiator-like pipes.

어떤 장치에서는 판에 주름이 잡혀 있고 그 주름에서 ‘라디에이터’식으로 관(管)들이 뻗어 있다.

5. It featured vertical transitions between the highs and lows of the Corrugations and two logo panels on each side

6. Each punch is disposed in one of the bores and aligned with one of the annular corrugations of the mold cavity.

7. N2 - We present a one dimensional model for the development of Corrugations in roads subjected to compressive forces from a flux of cars.

8. Beginning at the eastern end of the Great Central Road near Docker River right through to Yulara in Northern Territory, Corrugations were the …

9. We named this trip The Corrugation Way due to the severity of the Corrugations we came across on sections of gravel roads we travelled

10. To study the effect of corrugated skin, in January–February 1935 a single TB-3 4AM-34R had the corrugations incrementally covered with fabric.

11. ‘Strangely, the pattern on my feet matched the Corrugations on the soles of the boots.’ ‘‘It caused a slight bit of wrinkling or Corrugation in the painting which caused a few …

12. Corrugation the formation of Corrugations (bends or waves) on sheets of ferrous and nonferrous metals, asbestos cement, cardboard, or fabric in order to increase the materials’ stiffness under conditions of bending or compression strains.

13. The Corrugated paperboard shall be tested for bending resistance by adapting TAPPI T-556 to confirm that minimum acceptable stiffness, listed below, is met, except that for each specimen tested the corrugations shall run in the long direction of the specimen.

14. Filiform element usable for reinforcing moldable materials particularly concrete, said filiform element having Crimpings or corrugations distributed over its length, showing the following features: maximum wave amplitude of the longitudinal axis: 1 to 1.5 d; maximum wave-length: 10 d; minimum wave-length: 7 d; maximum fiber length: 65 d; minimum fiber length: 45 d; fiber diameter (d): max