chamfer in Hungarian

ézsû

Sentence patterns related to "chamfer"

1. For the creation of the Chamfer in AutoCAD meets the Chamfer command

2. Plastic pipe joints fit best with a Chamfer and REED's PB series Chamfer tools create a smooth, consistent 15° Chamfer …

3. What does Chamfer mean? Chamfer means to put an edge, angle or groove in

4. Chamfer strip for concrete structures

5. Chamfer command has Two methods

6. 3 Pcs 1/2" Shank Chamfer Router Bits, Chamfer & Bevel Edge Forming Router Bit Set Angle Bit Set Hand Held Router Chamfer Cutter Tool, 15/22.5/30 Degree …

7. Chamfer: A Chamfer is a 45-degree beveled edge that is built into various designs, including architectural and tech products

8. Follow these steps for how to use the Chamfer command: Select the Chamfer command from the Modify panel in the Home tab

9. You can Chamfer lines, polylines, rays, and xlines

10. Chamfer Based on these equations we investigated how the system parameters including assembly speed, robot configuration, Chamfer angle, coefficient of restitution, etc

11. Rotary Broaching does require the use of a chamfer

12. This is the main difference between Bevel and Chamfer

13. The Barcor Chamfer Gage is a precision instrument designed specifically to measure the top (major) diameter of a Chamfer, countersink or tapered hole

14. Their angled profile allows Chamfer, bevel, and other angled cuts

15. Chamfer Bits - cut a bevel on the edge of a workpiece

16. Verb (used with object) to make a Chamfer on or in.

17. Bevel is the more common term out of bevel and Chamfer.

18. Chamfer mills have angled cutting edges at the nose of the tool

19. Chamfer router bits can reliably create these cuts without much preparation work

20. (verb) An example of Chamfer is to make angled corners on a table.

21. Chamfer - Traduzione del vocabolo e dei suoi composti, e discussioni del forum.

22. The chamfers could be manufactured by either machining the chamfer into the stock material, or by tumbling the stent in a tumbler to abrasively wear the edges to form a chamfer.

23. Concrete Chamfer 90 durometer plastic PVC concrete Chamfer material is excellent in long line and straight uses and can also be used in a majority of large radius curved and round applications.

24. Create a variety of different Chamfering features with our many Chamfer Cutter options

25. (8) From the top of the flange as far as the external chamfer.

26. The Chamfer Tool attaches to an electric or cordless drill (not included) to deburr and Chamfer both the inner and outer diameters of plastic pipe such as PVC, CPVC, ABS and PE

27. Bevel and Chamfer: What’s the Difference? Monday, May 11, 2015 Guilloché lathe

28. If your product supports 3D modeling, you can also Chamfer 3D solids and surfaces

29. Chamfer mills are used for removing material in beveling, Chamfering, countersinking and deburring operations

30. Chamfer definition is - to cut a furrow in (something, such as a column) : groove.

31. The major diameter of the Chamfer is read directly on the dial or electronic indicator

32. Must see: Facade, chamfer details, columns, main balcony, terrace. Monument Characteristics Type of monument: Residence.

33. Two lines: The original lines are trimmed and a third line element forms the Chamfer

34. To chamfer means cutting a furrow in the sheet in the form of a column.

35. Shop evertrue pine Chamfer 3/4" x 8' x 3/4" at Lowes.com

36. Steel Chamfer is available in three sizes: 1/2″, 3/4″, and 1″ at 10′ lengths.

37. The range of chamfer angle is possible set up on knifes holder from 25 to 50°.

38. Each sheet metal piece has one chamfer (41, 42) on each of the two ends thereof.

39. Chamfer strips are typically used in construction forms, creating a Chamfered edge at the concrete corners

40. The peripheral surface of the inner guide vane base (20) is provided with a chamfer (26).

41. From the Cambridge English Corpus It shows that a higher coefficient of restitution and a smaller Chamfer …

42. Metal fiber having a chamfer in the fiber edge extending in the longitudinal direction of the fiber

43. Chamfer command in addition to the two-dimensional design in AutoCAD is also used in 3D modeling

44. A bevel or Chamfer is an angled line that meets the endpoints of two straight 2D objects

45. Chamfer in AutoCAD - is the bevel edges of two objects or 2D-3D-adjacent faces of the body

46. A Chamfer is an angle on the edge of a workpiece most often formed through cutting material away

47. Used to construct a Chamfer between either two lines or adjacent segments of a line string or shape

48. Edge Chamfer allows you to round the edges of a mesh, similarly to Edge Bevel.You can customize the effect by fine-tuning the tool's properties, use Profile shapes to determine the shape of the Chamfer, and modulate the effect using Falloffs.

49. ‘The lead-in Chamfer in the design compensates for any misalignment during tube insertion.’ ‘He says that they've tried to provide a more three-dimensional look to the rear; he points to the Chamfer on the lid of the trunk as an example.’

50. A Chamfer gage is a measurement tool that measures the major diameter of Chamfers, tapered holes and countersinks