torsional in English

adjective

['tor·sion·al || 'tɔrʃənl /'tɔː-]

of or related to twisting force

Use "torsional" in a sentence

1. Torsional shock absorber

2. Steric hindrance between adjacent groups can also affect torsional bond angles.

3. As missile-vertical-launcher hatch and bomb crevasse in war vessel would weaken ship hull's torsional stiffness, it was full necessary to study naval vessel's torsional strength.

4. 27 First of all, the two undamped multi-freedom torsional vibration models of DMF under idling and driving condition are built based on the principles of vehicle power train equivalent torsional model.

5. The torsional vibration damper (10) has a first (38) and second energy accumulating device (40).

6. Rotational speed-adaptive tuned mass absorber and torsional vibration damper with the same

7. Axial steel struts of crisscross section need to be checked on torsional buckling.

8. It can be seen that using the method of to allow for torsional buckling leads to significant reductions in the design strength, even for Cruciforms with low b/t ratios and correspondingly high torsional resistances

9. Compensating device and method for compensating for disruptive torsional vibrations on rotatable machine elements

10. Formulae separating the torsional input effects from the accidental eccentricity effects are presented and discussed.

11. Method and apparatus for acoustic downhole telemetry and power delivery system using transverse or torsional waves

12. 2axle wagons: in dependence of tare weight, length over buffers and torsional stiffness acc. the following diagram:

13. Struts of monosymmetric section built with angles and cut-Ts need to be checked on flexural-torsional buckling.

14. Measurement of the dynamic shear modulus with a torsional pendulum at frequencies of about 1 cps.

15. Furthermore, factors such as stiffness or shear and torsional strength may be more important than bending strength.

16. The beams (14) allow deflection of the pad (12) by either deflecting or twisting in a torsional mode.

17. Because of their excellent torsional capacity, box girders are used extensively in modern bridge construction having curved alignments.

18. The different behaviour of their expansion coefficients can be explained by activation of rotational- and torsional-vibrations.

19. A newly developed device allowed non-destructive torsional biomechanical evaluation of the regenerate strength as in vivo measurements.

20. In addition to mechanical dampers also active damping methods serve as suitable alternative to dampen torsional vibrations at test benches.

21. 26 There would be an advantage, however, in using a stiffer-shafted club because the resulting higher torsional stiffness increases accuracy.

22. Low cycle fatigue tests of mild steel were conducted in uni-axial and torsional loading at constant strain amplitude.

23. In both methods, the maximum diffence of the intraindividual torsional angles and length measurements was 7 degrees and 7 mm.

24. Further loads arise from torsional vibration, as the rotary movement of the Crankshaft is constantly being abruptly accelerated and decelerated

25. Investigations of the elastic local and torsional buckling and post-buckling of Cruciforms columns show that these two modes are virtually identical

26. The first yield and inelastic buckling approaches often used to formulate methods of designing columns against flexural buckling are extended to the torsional buckling design of Cruciforms.

27. A physical model of the active control of torsional wave is set up in this paper. Dinfluence of error sensor and secondary source on the optimal control results is studied.

28. Therefore, Congruous torsional down beating nystagmus should always be checked when performing Semont's maneuver because it could help in predicting success of physical treatment and in managing patients

29. Nonlinear finite element meth od is used to analyse the static behavior of cold -formed light- gage C-purlins when diaphragm lateral- bracing and torsional restraint arc taken into account.

30. The MC7 series beam Coupling is a stainless steel version of "MCA(C)" series, with higher torque capacity and torsional stiffness plus increased fatigue resistance due to the material used

31. An economical weld connection can be established in that an end face of the stripped end 4 of the aluminum stranded conductor 2 is welded to the connection part 10 by means of torsional ultrasonic welding.

32. So as to allow better use of the torque transmission device with a rotary impact screwdriver, the torsional angle of the stop section (20, 20") in the screw tightening direction is greater than in the screw loosening direction.

33. The coated drill stem assemblies disclosed herein provide for reduced friction, vibration (stick-slip and torsional), abrasion and wear during straight hole or directional drilling to allow for improved rates of penetration and enable ultra-extended reach drilling with existing top drives.

34. The coated drill stem assemblies disclosed herein provide for reduced friction, vibration (stick-slip and torsional), abrasion, and wear during straight hole or directional drilling to allow for improved rates of penetration and enable ultra-extended reach drilling with existing top drives.

35. Another feature of these experiments is that the strain recovery, when the creep stress is removed, after some period of torsional creep is greatly accelerated by the application of the fatigue stress: indeed, complete strain recovery may not occur even after extended times in the absence of fatigue.

36. Over 100 papers discuss such topics as designing a real-time autofocusing system for a Collimator with a long focus length and large aperture, chance constrained model predictive control based on set-valued optimal algorithms, applying virtual prototyping technology in the design of a drive axle, the hydrodynamic forces of torsional wave propulsion by extended large-amplitude elongated-body