tolerances in English

noun

1

the ability or willingness to tolerate something, in particular the existence of opinions or behavior that one does not necessarily agree with.

the tolerance of corruption

synonyms: acceptance, toleration, open-mindedness, broad-mindedness, forbearance, liberality, liberalism, patience, charity, indulgence, understanding

2

an allowable amount of variation of a specified quantity, especially in the dimensions of a machine or part.

250 parts in his cars were made to tolerances of one thousandth of an inch

noun

acceptance, toleration, open-mindedness, broad-mindedness, forbearance, liberality, liberalism, patience, charity, indulgence, understanding
endurance of, resistance to, resilience to, resistance to, immunity to
leeway, margin, allowance
permissiveness

Use "tolerances" in a sentence

1. Tolerances: Tolerances are provided to allow for human error during the grading and packing process.

2. Circuit and method for adjusting circuit tolerances

3. It has tremendous tolerances for terrain and climate.

4. Taking into account mechanical tolerances the target area shall:

5. Ambient light values shall be measured within the following tolerances:

6. Course Name (Evaluating geometrical tolerances for assembly ) Code 012T Description

7. Tolerances on Bandsawed parts What is the accepted tolerances on dimensions and squareness, on material cut by the supplier? Vladimir 11-15-2009, 05:42 PM #2

8. Grading curve of the aggregate in the asphaltic mix, with tolerances

9. Grading curve of the aggregate in the asphaltic mix with tolerances

10. Maximum permitted tolerances for abundance ratios for selected mass fragments:

11. Our Achromats have precise specifications and tolerances for uncompromising image quality

12. Ac input supply is within required tolerances and supplies the UPS.

13. The values quoted are absolute limit values including any measurement tolerances.

14. Grading curve of the aggregate in the stone mix, with tolerances.

15. Course Name (Dimensional and Geometrical Tolerances ) Code 241-4H6-RI Description

16. Figure 2 Grading curve of the aggregate in the asphaltic mix, with tolerances

17. Figure 2: Grading curve of the aggregate in the asphaltic mix with tolerances

18. · Add the following provision to all classes in the section on quality tolerances:

19. • Welded axle tubes with tight tolerances so chain adjustment is never needed.

20. Tolerances are held uniformly from the mounting to the working Collet taper

21. Device for adjusting tolerances when fastening an add-on to a base

22. We pride ourselves on designing and manufacturing Broaches for difficult jobs with tight tolerances

23. Concentricity tolerances have a feature math type when the considered feature has surface data

24. The machines that manufacture Lego bricks have tolerances as small as 10 micrometres.

25. Timken ® engineered Bearings feature precision tolerances, proprietary internal geometries and quality materials

26. Additional control of amplitude is used to correct manufacturing tolerances and temperature sensitivity.

27. Figure 2 : Grading curve of the aggregate in the asphaltic mix with tolerances.

28. For all phases of acceleration, constant velocity and deceleration, standard NEDC tolerances shall be applied;

29. Crimson Trace Lasergrips and Laserguards are precision-engineered and expertly manufactured to exacting tolerances

30. For cross wire welds inside the lamps, tight tolerances during wire penetration are requested.

31. DILLIMAX TL plates are plates with higher requirements for both dimensions and flatness tolerances.

32. Easy to machine, Acetal makes an outstanding choice for applications that require complex, tight tolerances.

33. Tolerances of angles for the lower legform impactor at the time of first impact

34. Thus it offers the best prerequisites for the optimal adjustment of superior tolerances and technical properties.

35. On a Blueprinted motor one could say there “are no tolerances”, since everything is matched at …

36. Modern Cannon are complex mechanisms cast from high-grade steel and machined to exacting tolerances

37. The seal for the vent outlet may be manually adjustable to compensate for manufacturing tolerances.

38. For all phases of acceleration, constant velocity and deceleration, standard NEDC tolerances shall be applied.

39. The actual torso angle corresponds theoretically to the design torso angle (for tolerances see paragraph #.#.#. below

40. I¿) and the allocated recesses are mechanically produced to fit accurately and to have exacting tolerances.

41. Derogation from specifications for admitted tolerances for alcohol content laid down in Article #: Royal Decree #/# [cf

42. b. for the adjustment, to required tolerances, of the longitudinal magnetic field of free electron 'lasers`.

43. Annealed seamless stainless steel tubing is suitable for applications demanding higher strengths and tighter tolerances

44. The actual torso angle corresponds theoretically to the design torso angle (for tolerances see paragraph 3.2.2. below):

45. The actual torso angle corresponds theoretically to the design torso angle (for tolerances see paragraph 3.2.2 below);

46. 1 [With specific provisions related to moisture content, size and tolerances, and the absence of skin.]

47. Over # km/h, it is accepted to go beyond tolerances provided the accelerator pedal is fully depressed

48. The actual torso angle corresponds theoretically to the design torso angle (for tolerances see paragraph #.#.# below

49. The actual torso angle corresponds theoretically to the design torso angle (for tolerances see paragraph 3.2.2);

50. The actual torso angle corresponds theoretically to the design torso angle (for tolerances, see paragraph #.#.# below