tensile in English
Compressive forces are generally significantly greater than the tensile forces generated in a tensile test.
Therefore, concrete beams are reinforced with steel rods on the tensile side (in cross section) when experiencing bending.
Use "tensile" in a sentence
1. (4) Bending and tensile strength
2. Viscosity, elasticity, and tensile strength.
3. Key words: concrete, accelerated strength, tensile strength, admixtures, curing, splitting tensile strength, modulus of rupture, strength correlations.
4. Bslm-8BP-62: Typical Tensile Values
5. Filament density steady and tensile force.
6. The composition gives a cured article improved in tensile strength, tensile shear bonding strength, and adhesion to various adherends.
7. Portable sander having novel abrasive sheet tensile stress
8. “Alkalised jute fiber tensile properties,” BioResources 4(2), 566-588
9. Cellulose has been described as a “tensile material without peer.”
10. A ratchet spring provides tensile force to the ratchet pawl.
11. 13 Feature: excellent sealing and flexibility, tensile moderate, with static electricity.
12. Relieving the tensile pressure on the cable triggered aeroelastic flutter.
13. Bimanal Osn electrolysis Tensile performance of smart lapse and voluntary sterilization.
14. 7 To measure tensile strength and breaking elongation of single yard.
15. According to the present invention, the complex improves the adhesive force between a metal and a resin, and as for tensile strength, even after thermal shock tensile strength is maintained.
16. The allowable change in tensile strength should not exceed + 25 per cent.
17. The allowable change in tensile strength should not exceed +25 per cent.
18. minimum elongation at fracture of the metal chosen under tensile stress in %.
19. The allowable change in tensile strength shall not exceed +25 per cent.
20. These compressive stresses compensate for the tensile stresses produced by the bonding process.
21. Key words: code calibration, geometric properties, reliability, steel, tensile strength, yield strength.
22. As it only takes place under tensile stress, the plane of the Crazing …
23. Strain-Ageing is known to cause an increase in yield strength and ultimate tensile strength of reinforcing steel bars, while tensile elongation capacity will be less in strain-aged steel bars
24. Blackcap Admix Contractor Strength provides increased strength, resiliency and compressive and tensile PSI
25. Acetal is an engineering thermoplastic with high tensile strength, stiffness and fatigue endurance
26. 1 For the tensile strength of monofilament spun by arachnids was the key.
27. Longitudinal tensile forces from starting and acceleration, as well as compression from braking.
28. 15 The structure and tensile property of bast fiber of hibiscus was studied.
29. Method of concreting expanded hole for a construction pile and a tensile member
30. Acoustic pressure transferred to the plate results in tensile strain of the flexible extensions.
31. ● Bone has been described as “an engineering masterpiece of tensile, compressive and elastic strength.”
32. Biaxial geogrids are geosynthetic materials formed into a grid of integrally connected tensile elements
33. Admix 500 is used to increase tensile, bond, and flexural strength of approved products
34. Acoustic pressure communicated to the plate results in tensile strain of the flexible extension.
35. Witte specializes in precision machining of all size parts in high-tensile aluminium alloys.
36. Above 35% of the tensile strength at the loading age, the material exhibited viscoplastic behaviour.
37. || Number of bow anchor chains || Length of each chain || Tensile strength of each chain ||
38. || Number of stern anchor chains || Length of each chain || Tensile strength of each chain ||
39. Increasing the thickness of the adhesive layer had no significant influence on tensile bond strength.
40. A tensile stress opens the crack and pulls it through the slide resulting in fracture.
41. Tensile strength and flexibility have been assessed with the aid of a four point bending configuration.
42. They exhibit improved adhesion to various substrates, increased tensile strength and improved resistance to cracking.
43. Under excessive tensile strain, the tubes will undergo plastic deformation, which means the deformation is permanent.
44. Since the concrete expansion part is formed on the end of the construction pile or tensile member, the allowable bearing capacity of the construction pile or the pulling resistance of the tensile member can be significantly improved.
45. Conversely, low to moderate tensile strain and stress is associated with direct repair, or intramembranous ossification.
46. Ductility . A ductile material is one which can be drawn out permanently by a tensile force.
47. 11 The condition of uniaxial stress is approximated in prismatic bars subjected to pure axial tensile.
48. These include tensile strength, wet and dry tear strength, burst strength, air permeability, seal strength and integrity.
49. Amosite tensile strength and heat resistance made it a common additive for structural steel, as well
50. Flatwise tensile testing is used to measure bond strength of adhesives according to ASTM C297-61.