pressure drop in English

condition in which began a sudden decrease of pressure

Use "pressure drop" in a sentence

1. Inlet pressure drop (): ... kPa in the engine

2. — pressure drop across the LFE matrix (EDP)

3. The resulting pressure drop may lead to cavitation.

4. Internal pressure drop of additional non-ventilation components (Δps, add)

5. 4 High porosity, high air permeability and low pressure drop.

6. In the meantime, not only pressure drop, absorption at the same time.

7. 4 The pressure drop was the driving force of atomization by nozzle.

8. Low-pressure drop structure of particle adsorbent bed for adsorption gas separation process

9. The convective heat transfer coefficient and pressure drop in ceramic foam structures are measured.

10. The vent stack shall be sized to prevent flow restriction due to pressure drop.

11. Low pressure drop, high surface area platinum recovery system in a nitric acid plant

12. When pulsation amplitude increases, air voidage increases a bit, but bed pressure drop increases.

13. The gradient of the pressure drop in the pressure accumulator is ascertained during the remaining partial stroke, and the closing characteristic of the control valve is determined from the gradient curve of the pressure drop.

14. The first is to eliminate the Cavitation and thus the damage by managing the pressure drop

15. The first is to eliminate the Cavitation and thus the damage by managing the pressure drop

16. Low pressure drop, high surface area ammonia oxidation catalyst and catalyst for production of hydrocyanic acid

17. The pressure drop of the arterioles is the product of flow rate and resistance: ∆P=Q xresistance.

18. Explicit pressure drop-flow rate relation for laminar axial flow of power-law fluids in concentric Annuli

19. A compact reformer with a very low pressure drop is suitable for producing hydrogen for fuel cell.

20. The pressure drop in the brake pipe to obtain a full application must be 1,5 bar ± 0,1.

21. Airflow is generated through the nose owing to a pressure drop between the nasal inlet and the nasopharynx

22. Testing services for particle retention, capacity, media, integrity, resistance to environmental conditions, pressure drop, motor emissions, and cleanliness

23. Solberg Manufacturing designs specialty Coalescing filter elements for power generation applications in multiple sizes with low pressure drop

24. The straight line, poppet - type construction of the CU 7 minimizes pressure drop and provides smooth flow characteristics.

25. Gas flow is a function of inlet pressure and temperature, pressure drop between the SSV inlet and throat.

26. The heat transfer and the pressure drop characteristics of the regenerator matrix must be in an acceptable range.

27. A clean, high efficiency, low pressure drop, adsorptive filter material that is porous and includes an acidic functional group.

28. Heat transfer fins (110), and heat exchangers (100) incorporating such fins (110), enhancing heat transfer with acceptable pressure drop increase.

29. The ceramic-based foam allowed for over 80% particulate filtration as well as an acceptable pressure drop within the system.

30. An expanded metal (10) with an aerodynamic cross section for use in high velocity fluid flows to decrease pressure drop.

31. The clearcurrent® TS1000 Coalescing filter delivers outstanding Coalescing performance with low pressure drop, low maintenance, and a long service life.

32. Upon request of the manufacturer, the approval authority may accept per derogation a pressure drop threshold of 50 % instead of 60 %.

33. These all metal suction strainers are furnished with optimized pleat size and screen area for extended life and low pressure drop.

34. The maximum expected Circulating pressure is the total frictional pressure loss and pressure drop at the bit at the total hole depth

35. The detector adopts pressure drop principium to measure micro-ohm. Electric circuit structure adopts four-circuit measuring method, eliminate connection evocative error.

36. Circuiting is really a balancing act of tube velocity and pressure drop. In other words, think of a coil as a matrix

37. Experimental results showed that the Circumfluent hydrocyclone with a separate column has the highest collection efficiency and the lowest pressure drop: 3

38. Accumulators supply auxiliary pressure to dampen shock loads or to compensate pressure drop in applications where system pressure needs to be maintained.

39. An aerodynamic shape is applied to the leading edge of the louver thus lowering drag and reducing the pressure drop at the inlet.

40. Wikipedia Info : The fluid dynamics principle states Bernoulli that the increase in fluid velocity occurs simultaneously with a pressure drop or reduction of

41. The experimental results showed that the Circumfluent hydro -cyclones with the separating columns had the higher separating efficiency and the lower pressure drop

42. Method for the prevention of false alarms in a pressure drop-based leak identification system, and apparatus for carrying out such a method

43. The experimental results showed that the Circumfluent hydro -cyclones with the separating columns had the higher separating efficiency and the lower pressure drop: 2

44. The main parameters of gas-liquid two-phase flow, such as flow patterns, pressure drop and liquid hold-up, are investigated in this paper.

45. When hauled to the surface, however, Blobfish encounter a rapid pressure drop, and the anatomy that works so well at great depths suddenly turns …

46. To eliminate Cavitation the total pressure drop across the control valve is split, using multi-stage trims, into smaller portions as shown in the image.

47. To eliminate Cavitation the total pressure drop across the control valve is split, using multi-stage trims, into smaller portions as shown in the image.

48. The hollow fiber membranes formed using the controlled temperatures of this invention have acceptable strength characteristics and asymmetrical pore structures which provide a low transmembrane pressure drop.

49. This means that the limit of Conveying, in terms of air mass flow rate, has to be changed for each pressure drop line according to the new conditions.

50. So, the total pressure drop of the steam does not take place in the first nozzle, but is split equally between all the nozzle rings in the arrangement.