ppm in English
water containing 1 ppm fluoride
Use "ppm" in a sentence
1. Biphenyl: (Diphenyl) (92-52-4) 0.87 ppm : 9.6 ppm : 300 ppm : LEL = 6000 ppm (DOE, 2016) Regulatory Information
2. High fluorine concentration (1680 ppm–2700 ppm), formation of fluorite.
3. Soil contains zinc in 5–770 ppm with an average 64 ppm.
4. - chlorination, including prechlorination at 6 ppm and postchlorination at 1 ppm, including tower absorption.
5. Samples were spiked with 0, 6.25 ppm and 15.63 ppm of the almond paste.
6. - chlorination, including prechlorination at 6 ppm and postchlorination at 1 ppm, including tower absorption;
7. Borates should be approximately 50 ppm, TA 80-120 ppm and pH between 7.4 and 7.6
8. The method is accurate to ±0.4 ppm.
9. Benzaldehyde 100-52-7 TWA 2 ppm USA
10. The average Bromine concentration in seawater is about 70 ppm
11. Ideal Total Alkalinity Range for Pools: 80-120 ppm
12. (1,8) Acetonitrile has an odor threshold of 170 ppm
13. The odor of hydrogen Cyanide is detectable at 2-10 ppm (OSHA PEL = 10 ppm), but does not provide adequate warning of hazardous concentrations.
14. These included preputial gland carcinomas (in 5/50 males at 200 ppm, p < 0.001) and renal tubule adenomas in both sexes (in 1/50 males at 6.25, 3/48 at 62.5 ppm and 1/49 at 200 ppm, and in 2/50 females at 200 ppm, compared with none in controls).
15. Scatterometers having a measurement "accuracy" of 10 ppm or less (better);
16. For example, Poinsettia shows little change after a 24 hour 1 ppm ethylene exposure, yet Cuphea hyssopifolia Abscises all flowers after a 24 hour 0.01 ppm exposure
17. The ideal total Alkalinity level is 80 to 120 ppm
18. 2 gas continuously, “Cleverin S” and “CleverinL” which maintain the ClO 2 concentration (approximately 100 ppm and 500 ppm, respectively) stably in solution for a long period of time
19. Most people can begin to smell Benzene in air at approximately 60 parts of Benzene per million parts of air (ppm) and recognize it as Benzene at 100 ppm.
20. Free ammonia • Albuminoid ammonia • Nitrites • Nitrates The amount of free ammonia in potable water should not exceed 0.15 ppm and that of Albuminoid ammonia should not exceed 0.3 ppm
21. Color Copiers 50 ppm and under: Canon imageRUNNER Advance C3530i II
22. Scatterometers having a measurement accuracy of 10 ppm or less (better);
23. a. Scatterometers having a measurement accuracy of 10 ppm or less (better);
24. Gemessen wird ein Drei- 2. Spezielle Produkte und Anwendungsgebiete: 2.8 Pharmazeutische Produkte und Kosmetica Protonenpeak des Ephedrinhydrochlorid bei 1,16 ppm gegen das Drei-Protonen-Singlet des Acetamids bei 2 ppm
25. Nature and order of magnitude (... ppm, ... %) of any additives (e.g. stabilising agents or inhibitors)
26. The carbon analog of pyridine, benzene, has only one proton signal at 7.27 ppm.
27. Failures have been reported in environments with as little as 10 ppm Chlorides
28. Content of free formaldehyde in hardened adhesive (glue) shall not exceed 10 ppm.
29. (1) The odor threshold for 1,3-Butadiene is 1.6 parts per million (ppm)
30. (6,8) Phthalic Anhydride has an odor threshold of 0.053 parts per million (ppm)
31. Highest accumulation factors of more than 40 were recorded at 0.05 ppm Cd.
32. Some granites contain around 10 to 20 parts per million (ppm) of uranium.
33. Ore grades as little as 0.5 parts per million (ppm) can be economical.
34. Soils in the region are alluvial, deep, rich and well-drained, with a pH between #.# and #.#, organic matter levels over #.# %, phosphorus content of #-# ppm, potassium content of #-# ppm and adequate lime and sulphur
35. Preferably the residual acrolein content of the PTT resin is less than 10 ppm.
36. It has a residual oil indicator with an accuracy of smaller than 0.01 ppm.
37. (1,7) Benzyl chloride has an odor threshold of 0.044 parts per million (ppm)
38. Preferably the residual acrolein content of the PTT resin is less than 5 ppm.
39. (ppm) hypochlorite (chlorine) solution or another Bactericidally equivalent halogen for at least one minute
40. Catenacci et al., 1984 0.2-8 ppm area sampling increase (significance not reported) 26 workers concomitant exposure to ACN Major et al., 1998 7 ppm area sampling at different workplaces significant increase 75 workers
41. Using cytochemical methods the influence of various concentrations of aflatoxin B1 (100 ppm 10 ppm, 0 ppm) on the enzymes succinic dehydrogenase, L(+)-lactate: NAD oxidoreductase, alcohol dehydrogenase, L-isocitrate: NAD oxidoreductase, malate dehydrogenating enzyme (NAD as acceptor), NADPH2: cytochrome reductase, cytochrome oxidase and acid phosphatase of the fungusMucor hiemalis was investigated.
42. The abundance of elements in Earth's crust is shown in tabulated form with the estimated Crustal abundance for each chemical element shown as mg/kg, or parts per million (ppm) by mass (10,000 ppm = 1%).
43. Inclusion of gold analyses for all Bornites yields averages of 0.97 and 1.69 ppm Au for Batu Hijau and Skouries, respectively, higher than the average of 0.46 ppm for the two bornite analyses from Kingking
44. One pound of sodium Bisulfate leaves behind 9.6 ppm of sulfate in 10,000 gallons of water
45. A quantitative determination of sulfonamides in a concentration of 0.5 ppm in acidic solution is possible.
46. The odor threshold of Acetaldehyde is 0.05 parts per million (ppm) (0.09 mg/m 3)
47. B= hydrocarbon concentration (ppm C) of the oxygen interference check gases used in subsection (d
48. After this filter, compressed air is the amount of oil is up to 1 ppm.
49. Allyl acetate is typically used in non-alcoholic beverages at 1.0 ppm; in ice
50. Acuity PPM provides a set of basic portfolio-level dashboards, metrics, and analytics as