pinion in English
Buglike, and reminding me of dragonfly wings were two long pinions , and just under them were two more.
It is used for railroad frogs, for steel mill coupling housings, pinions , spindles, and for dipper lips of power shovels operating in quarries.
he pinioned the limbs of his opponents
Swans are caught and their wings' flight feathers are clipped, or pinioned .
Use "pinion" in a sentence
1. Pinion angle level gauges
2. Rack and pinion sieve adjustment mechanism
3. End play in drive pinion bearings.
4. Install pinion front bearing, if necessary.
5. Usually, we adopt pinion drive for large mills.
6. Rotate the pinion yoke three or four times.
7. Bearing assembly, mounting of a bevel pinion shaft
8. Refer to Drive Pinion Bearing Pre - Load Adjustment.
9. Rack and pinion mechanism, accessor, and magnetic tape device
10. Worn teeth on ring gear or drive pinion gear.
11. Why don't you try tightening the pinion nut first?
12. Check ring gear and pinion gear teeth contact pattern.
13. The disclosed pinion shaft support structure allows attachment of pinion shafts in a phase-aligned state by one simple process not requiring special equipment or a staking step.
14. Bearing for a drive pinion shaft, especially an all-wheel front-axle transmission
15. Rack and pinion steering gear with automatic adjustment of the thrust element
16. Cinq is raising funds for Cinq Shift:R for Pinion on Kickstarter! The world's first drop-bar road shifters (Shift:R Road) and flat-bar trigger shifters (Shift:R Tour) for Pinion gearbox equipped bikes
17. Rack mounting auxiliary adjusting apparatus used for rack and pinion climbing vertical ship lift
18. The mounting plate comprises an interface adapted to be Circumjacently mounted about the differential drive pinion gear, and a torque arm bracket integral with the interface and spaced apart from the differential drive pinion gear
19. The wings of the ostrich flap joyously: Are they the pinion and plumage of lovingkindness?
20. The set consists of an 18T hardened steel pinion and an extremely strong 56 plastic spur gear.
21. Thus the actuation of the control valves is independent of the helix angle of the pinion teeth.
22. In case of single portal axles (SP): Angle between pinion axle and crown wheel axle within ± 3,5°
23. The clutch disk allows the pinion gear to move with the rack when the mirror is manually adjusted.
24. A pinion is carried by the trigger lever for engagement with a rack carried by the actuator rod.
25. The Mount Washington Cog Railway, also known as the Cog, is the world's first mountain-climbing Cog railway (rack-and-pinion railway)
26. A gear rim is flange-mounted between two adjacent shaft ends, and engages with a vertically-swivelling pinion in the rotor turning gear.
27. The mounting plate comprises an interface adapted to be Circumjacently mounted about the differential drive pinion gear, and a torque arm bracket integral with the interface and …
28. The energy-saving Varioserv adjustable vane pump and steering column, Servotronic rack-and-pinion power steering and Dynamic Steering are provided by ZF Lenksysteme.
29. The gearing machine tool of the model YE is modified and a new milling head is designed to cut the envelope tooth of the pinion using Allelomorph method
30. To install the rack (6) on the sliding door (1), the pinion (7) can be placed into an adjustment position located below the working position.
31. The drive for the door leaf of a conventional door further comprises a drive motor (11) that is actively connected to the pinion shaft (104).
32. Lot* 40 Pinion 41 Stitches (I Fencing fad L Abrofatten A Ireiaad A like A Scotch OTTO Acarari SIDE GLANCES By GBI Fox SA Petite ^ndtectee SALimrtte 17
33. Meronyms (parts of "Cogwheel"): cog; sprocket (tooth on the rim of gear wheel) tooth (one of a number of uniform projections on a gear) Hyponyms (each of the following is a kind of "Cogwheel"): bevel gear; pinion and crown wheel; pinion and ring gear (gears that mesh at an angle) escape wheel (gear that engages a rocking lever)
34. It encompasses the epitome of the Arkansas River Canyonlands with dense pinion-juniper woodlands that roll over hilly and Canyoned terrain, while also providing mid-elevation mixed forests in …
35. Princess Royal's 'A' turret stopped working effectively early in the battle: the left gun was rendered inoperable when the breech pinion gear sheared, and the right gun misfired frequently.
36. The mechanical components for swiveling and the rack for shifting (adjusting interpupilary distance) of the left tube. The shaft with the pinion drives another rack on the rear side to ensure constant movement.
37. The distance between the object and a lens (6, 111) of the eyepiece can be adjusted in the deployed configuration, for example by way of a rack and pinion assembly (15, 17, 108, 109).
38. A type of miter gear where one gear (sometimes called a pinion) is smaller than the other, Bevel gears provide right-angle speed reduction at speed ratios ranging from 2: 1 to 5:1
39. The Culdee Fell Railway, a narrow-gauge rack-and-pinion mountain railway, runs from the summit of Culdee Fell down to Kirk Machan where it links to the standard-gauge line from Kildane to Peel Godred
40. The 15th century also saw the introduction of Cranked rack-and-pinion devices, called cranequins, which were fitted to the crossbow's stock as a means of exerting even more force while spanning the missile weapon (see right)
41. Hence the first problem in this example was to determine the absolute 3-D tooth geometry and related dimensional data for both pinion and gear in terms of spatial co-ordinates, which could then be used to generate data to CNC machine the (mould) surfaces.
42. The RepRap Snappy is able to create 73% of its own parts by volume with a design that eliminates as many of the non 3D printed parts as possible including belts and bearings which are replaced with a rack and pinion system.
43. Hence the first problem in this example was to determine the absolute 3-D tooth geometry and related dimensional data for both pinion and gear in terms of spatial coordinates, which could then be used to generate data to CNC machine the (mould) surfaces.
44. NEWTON & CO., LondonA mahogany-body Biunial magic lantern with lacquered brass lens sections, a pair of brass bound lenses each with rack and pinion focusing and a black enamelled chimney, lens panel engraved Newton & Co., Opticians to the Queen, 3 Fleet St., Temple Bar, London.
45. The teeth (7) of the outer toothing of the lubricating pinion (1) have a shortened tooth flank profile in relation to an involute toothing, wherein the addendum (hk) and/or the width of the tooth flanks in the peripheral direction are reduced in a tooth flank section which is situated radially outside the reference circle.