ohms in English

abbreviation

1

on Her (or His) Majesty's Service.

noun

1

the SI unit of electrical resistance, expressing the resistance in a circuit transmitting a current of one ampere when subjected to a potential difference of one volt.

Both antennas feature linear polarization, an impedance of 50 ohms and maximum input power at 10 watts.

Use "ohms" in a sentence

1. Well, the total resistance is 2 ohms plus 3 ohms plus 5 ohms, so it's equal to 10 ohms.

2. 6¿ ohms per square.

3. Terminating resistor 50 Ohms

4. — terminating resistor 50 Ohms

5. — Terminating resistor 50 Ohms

6. The official visualizer for “Ceremony” from the new album, Ohms, available everywhere now: https://Deftones.lnk.to/Ohms

7. Meter reads 1 5 ohms.

8. Let's say resistor 2 is 3 ohms, and let's say resistor 3 is 5 ohms.

9. ohms for a # volt circuit

10. Let's say resistor 1 is 2 ohms.

11. The Bridgeable amplifier operates at 1000 watts x 2 at 2 ohms and 2000 watts x 1 at 4 ohms

12. Z0 for free space is 377 Ohms.

13. Well, the total resistance is 10 ohms.

14. So total resistance is equal to 10 ohms.

15. a DC resistance of not more than 0,1 Ohms,

16. The impedance of a VDSL system is 100 Ohms.

17. Unit of Conductance is “MHOS” or simply ohms spelled backward

18. Terminating resistor # or # Ohms depending on radio-set type

19. Surface resistivity is defined as the electrical resistance of the surface of a material and is expressed in ohms (usually referred to as ohms per square).

20. — Terminating resistor 50 or 75 Ohms depending on radio-set type.

21. 20 is equal to the current times 10 ohms, right?

22. Atomizers (specifically, the heating coils within the Atomizer) are measured in ohms.

23. Kicker CXA600.5 Amplifier 43CXA6005 Ships as 46CXA6605 • 1200W Peak 600W RMS Full-Range 5-Channel Bridgeable Amplifier • 75 Watts RMS x 4 @ 2 ohms • • 2 ohms: 300 watts x 1 chan

24. Power Amplifiers are built to work with 4, 6 or 8 ohms of impedance

25. Begohm - A unit of resistance equal to one billion ohms, or one thousand megohms

26. The circuit board material has a resistance of at least about 500 ohms/square.

27. Our battery provides 9 volts of potential to drive current through resistor of 1500 ohms.

28. 4 canaux d’amplification, Bridgeables 2 par 2: Tension de sortie maximale (à vide) 4x 200 Volts: Puissance de sortie maximale (mode 4 canaux, charge 8 ohms par canal) 4x 1900 Watts: Puissance de sortie maximale (mode 4 canaux, charge 4 ohms par canal) 4x 3300 Watts: Puissance de sortie maximale (mode 4 canaux, charge 2 ohms par canal) 4x

29. Because I want to get my coil to have about 4 ohms of resistance.

30. Amp inputs at 4-, 8-, and 16-ohms makes Jettenuator more versatile than other Attenuators

31. Having a ‧rise time‧ of less than 10 μs into loads of less than 40 ohms;

32. Lower ohms mean more current and a hotter Coil, which means warmer and more voluminous vapor

33. with a surface resistance of between 102-1014 ohms as determined by test method ASTM D 257,

34. 5. Having a ‘rise time’ of less than 10 μs into loads of less than 40 ohms;

35. The electrical resistance between components and equipment in contact with each other shall not exceed 10 ohms.

36. 5. Having a 'rise time' of less than 10 μs into loads of less than 40 ohms;

37. 5. Having a “rise time” of less than 10 μs into loads of less than 40 ohms;

38. a. Output voltage greater than 6 V into a resistive load of less than 55 ohms, and

39. Capable of delivering their energy in less than 15 μs into loads of less than 40 ohms;

40. MICRO fuse, very fast-acting type. Plug-in. Ampere rating Nominal resistance cold 0.0156 Ohms. Voltage rating

41. Output voltage greater than 6 V into a resistive load of less than 55 ohms, and

42. having a "rise time" of less than 10 μs into loads of less than 40 ohms;

43. Having a ‘rise time’ of less than 10 μs into loads of less than 40 ohms;

44. output voltage greater than 6 V into a resistive load of less than 55 ohms, and

45. 2. Capable of delivering their energy in less than 15 μs into loads of less than 40 ohms;

46. a. Output voltage greater than 6 V into a resistive load of less than 55 ohms; and

47. The Bandmaster amp expects a 4 ohm load, and two 8 ohm speakers wired in parallel will make 4 ohms

48. Nombre de canaux 4 canaux d’amplification, Bridgeables 2 par 2 Tension maximale en sortie (sans charge) 4x 140 Volts Puissance maximale de sortie (mode 4 canaux/charge 8 ohms par canal) 4x 1200 Watts Puissance maximale de sortie (mode 4 canaux/charge 4 ohms par canal) 4x 1900 Watts

49. This PCMCIA DMM makes accurate 51⁄2-digit measurements of DC voltage and current, true rms AC voltage and current, and resistance (ohms).

50. The cable used to connect the MIL-STD-1553 bus and stub devices has a characteristic impedance of 78 ohms at 1 MHz.