multivibrator in English
A bistable multivibrator , which is controlled by the voltage that is induced by the rotor in the instantaneously currentless winding phase, is provided for alternatingly switching on the two winding phases.
Use "multivibrator" in a sentence
1. Astable multivibrator: It is a type of multivibrator also termed as a free running multivibrator
2. Definition: An Astable multivibrator is a type of multivibrator that does not require a triggering pulse thus, sometimes known as a free-running multivibrator
3. Monostable/Astable multivibrator Rev
4. Astable and Monostable Multivibrator Using 555 IC
5. Astable Multivibrator – constantly oscillates – For frequencies above 1 cycle per second, it is called an oscillator (multivibrator or square wave oscillator)
6. Bistable multivibrator, in which the circuit is stable in either state.
7. Hence Astable multivibrator is called pulse generator or square wave generator
8. Astable Multivibrators are the most commonly used type of multivibrator circuit
9. 6 — 17 March 2017 Product data sheet 1 General description The HEF4047B is a retriggerable Astable multivibrator that can be configured as either a positive-edge or negative-edge triggered monostable multivibrator
10. In this video, the design of Astable Multivibrator using the transistor (BJT) is explained
11. The Astable multivibrator in transient (time-domain) mode and add traces of both the
12. By definition, an Astable multivibrator circuit is a circuit that has no stable state
13. As we will advance through the section, we will see that the circuit has no stable states and therefore, it also known as the Astable multivibrator circuit. Astable Multivibrator circuit or Schmitt trigger Oscillator
14. The output of the Astable multivibrator circuit is a square wave that goes on indefinitely.
15. Astable Multivibrator mode of 555 timer IC is also called Free running or self-triggering mode
16. Astable multivibrator accomplished by fixing an RC network to the Schmitt trigger circuit in –ve feedback
17. The Astable multivibrator is a Schmitt trigger which input branch is a feedback loop with an additional RC series component
18. The Astable or free running multivibrator continuously switching from one state to the other and back to the first state
19. When it comes to making such an Astable multivibrator, the most common way is to use a 555 Timer IC.
20. It necessarily provides square wave as its output. Astable multivibrator is called so because both the states present here are unstable i.e., quasi-stable.
21. An Astable multivibrator circuit also termed as a regenerative switching circuit, is an electrical circuit that switches between HIGH and LOW states continuously
22. This circuit is an Astable multivibrator, or oscillator.The two transistors are cross-coupled in such a way that the circuit switches back and forth between two states
23. An Astable multivibrator is a free running oscillator that have no permanent “meta” or “steady” state but is continually changing its output from one state (LOW) to …
24. The Astable Multivibrator is another type of cross-coupled transistor switching circuit that has NO stable output states as it changes from one state to the other all the time.
25. All the Astable multivibrator circuits shown so far are intended to produce symmetrical output waveforms, with a 1 to 1 ratio of square wave to space (1:1 mark/space ratio)
26. ‘It monitors the charging of the timing capacitor in Astable and monostable circuits.’ ‘There is no stable state where the circuit can come to rest, so this circuit is known as an Astable multivibrator.’
27. ‘It monitors the charging of the timing capacitor in Astable and monostable circuits.’ ‘There is no stable state where the circuit can come to rest, so this circuit is known as an Astable multivibrator.’
28. Astable multivibrator means that the device will produce an output that goes high and stays high for some time, and then go low and stay low for some time, the cycle repeats for as long as there is …