lathe in English
I take the bulk away with a wood lathe tool, take it down and smooth it out with clay tools, and buff it with a rubber pad.
The mandapa remained a square, though it was now distinguished by circular columns, the shafts of which had been lathed and thus acquired a number of parallel knife-edges.
Use "lathe" in a sentence
1. Lathe, vise, acetylene torch.
2. Lathe machines, machine tools for lathes
3. This is a heavy duty turret lathe.
4. Lathe, open an oxygen seal on level " C. "
5. The daily walk, the lathe, the geometry lessons?
6. Collet for a long automatic turning lathe
7. Welcome to the lathe soft jaw video series
8. Phocion's father operated a lathe, producing iron tools.
9. 25 This paper introduces a method of transforming C620 universal lathe into copying lathe to turn the involute contour of automobile brake cam.
10. An artisan turns a vase on a lathe.
11. Welcome to the Lathe soft jaw video series
12. Control devices for computer numeric control (CNC) lathe machines
13. Member for processing with lathe, acicular member, and contact probe
14. 33/ 00 Drivers; Driving centres; Nose clutches, e.g. lathe dogs
15. This Lathe is fully functional and installation is complete
16. We learned about the fundamentals of cutting lathe soft jaws
17. Assorts - 60 mm Steel Vice Mounted on Lathe Vertical Slide
18. The main assembly of a Copying lathe is a duplicating device.
19. Boring done on a lathe can produce conical or cylindrical holes
20. Favorite Add to Handmade Lathe-turned Bloodwood Lidded Treasure Box TanagerSpringTurning
21. I've got so much work, I can't move from my lathe.
22. The scanning machine looks like a ten-foot-long (3 m) lathe.
23. These are slip-style Bobbers.Drill Lathe Video: https://youtu.be/KmpdEtvVRfISupplies:(following these A
24. Tilt along this axis influences how coolant and chips drain from the lathe
25. Bevel and Chamfer: What’s the Difference? Monday, May 11, 2015 Guilloché lathe
26. The lathe enabled an unskilled workman to quickly and easily turn out identical irregular shapes.
27. The pillars inside the mandapa are all finely lathe - turned with gracefully carved mouldings .
28. Manufacturing super-abrasive cutting tools for holemaking, face milling, end milling, and lathe applications.
29. The lathe is intended for machining of commutators mounted on rotors of electric motors.
30. He set up a workshop in a sister’s basement and built his own lathe.
31. Combine a holder and carbide insert to perform Cutoff and grooving tasks on a lathe.
32. These lathe Chisels are a delight to use for all kinds of custom wood turning
33. A Banksia pod mounted between centers with its core running parallel to the lathe bed
34. JET Geared-Head Engine Lathe with Acu-Rite 203 DRO, Taper Attachment and Collet Closer — 14in
35. Boring processes are typically performed using a lathe, milling machine or a horizontal Boring mill.
36. With a special lathe, we cut master records out of mirror-smooth discs of beeswax.
37. Seat ring is progressively crimped on a lathe to imprison the O - ring in it.
38. A new scheme of NC system for hydraulic turret lathe is given in this paper.
39. The carpenter’s bow lathe (8) and gouge (9) were used for cutting and shaping spindles.
40. The mandapa pillars are partially lathe - turned in respect of their capitals , while the shaft is square and angular , marking the beginnings of the characteristic and almost wholly lathe - turned pillars of the later periods .
41. Cutting tools, turning blades, lathe tools, drills, milling tools, thread cutting plates, screw stock, rasps, reamers
42. The tools will behave in exactly the same, predictable way all the time at the lathe.
43. Some of the pieces like this electronics counter measure mast is doable on the wood lathe.
44. Brazed-tip lathe tool bits have a carbide tip that has been Brazed onto a steel shank
45. If there were any defects, the recording session had to be repeated and another lathe cut made.
46. To reduce the lathe - bed and assure its stiffness requirement, a batten wall pore structure is designed.
47. It also finds that that the goods in issue are unsuitable for use independently of the lathe.
48. This frilly gingerbread style developed in the Americas after the invention of the wood- turning lathe made it possible.
49. The mandapa has open corners between the three shrines and on its two sides , and its pillars inside are lathe - turned .
50. Except the two innermost pillars of peripheral series abutting on the navaranga front , all others , as well as the four central ones , though in sandstone , are partially lathe - turned heralding the more completely lathe - turned pillars of schist or soapstone of the later Chalukyas and their successors .