galvanically in English
adverb
by means of an electric current; in a galvanic manne
Use "galvanically" in a sentence
1. A unit (12a, 12b, 12c, 12d) galvanically separates the processor (5) from an analog output circuit.
2. "Chassis connected to the electric circuit" means AC and DC electric circuits galvanically connected to the electrical chassis."
3. ‘Chassis connected to the electric circuit’ means AC and DC electric circuits galvanically connected to the electrical chassis.
4. If AC buses and DC buses are galvanically connected, isolation resistance between any high voltage bus and the electrical chassis shall have a minimum value of 500 Ω/volt of the working voltage.
5. If AC high voltage buses and DC high voltage buses are galvanically connected isolation resistance between all high voltage busses and the electrical chassis shall have a minimum value of 500 Ω/V of the working voltage.
6. If AC high voltage buses and DC high voltage buses are galvanically connected isolation resistance between the high voltage bus and the electrical chassis shall have a minimum value of 500 Ω/volt of the working voltage.
7. The non-inverted input is galvanically connected to the output of a second operational amplifier (OP1) which functions as an amplifier. The offset-affected alternating voltage (E) is applied to the non-inverted output of the amplifier (OP1).
8. For the vehicle inlet intended to be conductively connected to the grounded external AC power supply and the electrical circuit that is galvanically connected to the vehicle inlet during charging of the RESS, the isolation resistance between the high voltage bus and the electrical chassis shall be at least 1 MΩ when the charger coupler is disconnected.
9. For the vehicle inlet intended to be conductively connected to the grounded external AC power supply and the electrical circuit that is galvanically connected to the vehicle inlet during charging of the RESS, the isolation resistance between the high voltage bus and the electrical chassis shall be at least 1 ΜΩ when the charger coupler is disconnected.
10. For the vehicle inlet intended to be conductively connected to the grounded external AC power supply and the electrical circuit that is galvanically connected to the vehicle inlet during charging of the RESS, the isolation resistance between the high voltage bus and the electrical chassis shall be at least # ohms when the charger coupler is disconnected
11. For the vehicle inlet intended to be conductively connected to the grounded external AC power supply and the electrical circuit that is galvanically connected to the vehicle inlet during charging of the REESS, the isolation resistance between the high voltage bus and the electrical chassis shall be at least 1 MΩ when the charger coupler is disconnected.
12. For the vehicle inlet intended to be conductively connected to the grounded external AC power supply and the electrical circuit that is galvanically connected to the vehicle inlet during charging of the REESS, the isolation resistance between the high voltage bus and the electrical chassis shall be at least 1 ΜΩ when the charger coupler is disconnected.