frequency response in English
Because of variations in circuit frequency response , the recovered levels of the 404Hz and 2804Hz tones will be different than that of the 1004Hz tone.
Use "frequency response" in a sentence
1. Acoustic frequency response testers
2. The frequency response function includes an aerodynamic transfer function.
3. Optimum acoustical results: almost nil diffraction, neutral frequency response, no need for equalization.
4. Detection of catheter contact and alignment based on changes in frequency response characteristics
5. The omni-directional condenser microphone satisfies with perfect acoustic performance and ensures linear frequency response.
6. Porter considered the studio's acoustics problematic, with resonant room modes creating an uneven frequency response.
7. The plurality of parameters is related to at least a frequency response associated with the probe.
8. Linear distortion - frequency response, polar response, resonance - affects primarily the timbre and clarity of a loudspeaker.
9. The ideal Bandpass filter and the practical Bandpass filter frequency response is as shown in figure
10. Method for equalizing the amplitude/frequency response of an electro-acoustic transducer assembly, corresponding transducer assembly
11. Another issue to consider when selecting a watt-meter is the frequency response rating of the meter.
12. The limited frequency response of the headset eliminates the RF component, making the low pass filter unnecessary.
13. The relationship between residual wavefront phase error and frequency response in an adaptive optical telescope is analyzed.
14. A hydrophone assembly, (500), is provided that has a frequency response, (510), that matches that of an accelerometer.
15. Parameters for full activation of active power frequency response resulting from frequency step change (explanation for Figure 6)
16. The apparatus of the invention extends the low frequency response of the acoustical enclosure to approximately thirty Hertz.
17. The frequency response of a region of porosity and of a thick resin layer in particular are evaluated.
18. For example, filtering of audio frequency response in the design of loudspeaker cabinets can be achieved with mechanical components.
19. The Astatic 636L has a powerful noise-canceling system and a tailored frequency response system that provides maximum chatter power
20. In addition, if the system is time-invariant (so LTI), then the frequency response also will not vary with time.
21. In electrical engineering and control theory, a Bode plot / ˈboʊdi / is a graph of the frequency response of a system
22. Frequency response and step response measurements indicate that an adequate simulation is provided by this particular type of analog model.
23. Q Acoustics specs the 3030i’s frequency response as 46Hz-30kHz (+3db, -6dB), whereas nothing stirs below 64Hz in a 3020i
24. Below this resonance and down to low frequencies, the frequency response of elongation is smooth with amplitudes of around 20 nm.
25. The volume may include a region obliquely oriented relative to the diaphragm to support a low frequency response of the speaker.
26. Thermal Anemometry is a technique requiring a sensor to measure velocity at a single point with high accuracy and high frequency response
27. The Frequency Response of the Bipole is basically flat when you're OFF-axis (which is going to be most seats in the room)
28. 28 With a low end frequency response of -10% down to 0.31 Hz, the 3333A series accelerometers offer excellent phase response at low frequencies.
29. In the 1930s, loudspeaker manufacturers began to combine two and three bandpasses' worth of drivers in order to increase frequency response and sound pressure level.
30. The frequency response in one channel (5) is rectified so that the signals transmitted by the two channels have the same frequency but opposite amplitude characteristics.
31. The MX-118B consists of a heavy duty custom 18" low frequency driver in a sturdy and portable bandpass enclosure optimally tuned for extended low frequency response."
32. When combined with the NI Sound and Vibration Measurement Suite, NI 446x devices can perform noise emissions test, acoustic holography, frequency response, swept sine, and other analyses.
33. It is usually a combination of a Bode magnitude plot, expressing the magnitude (usually in decibels) of the frequency response, and a Bode phase plot, expressing the phase shift.
34. While it is particularly designed for use in measuring amplitude and phase distortion in differential pressure transducers, it can be employed for testing the frequency response of simpler transducer systems.
35. Typically this is achieved by altering the frequency response of the capsule and electronics to result in lower noise within the A-weighting curve while broadband noise may be increased.
36. The e 614 is a super-Cardioid condenser microphone, designed for demanding instrument recordings and performances that require extended frequency response, high SPL handling, fast transient response and compact size
37. 30 In this paper, a dynamic calibration method using a finite duration impulse excitation source is presented, which can be used to calibrate the frequency response of high-pressure transducers(HPT).
38. Constant-temperature Anemometers are popular because of their high-frequency response, low electronic noise level, immunity from sensor burnout when airflow suddenly drops, compatibility with hotfilm sensors, and their applicability to liquid or gas flows.
39. Features: Variable input gain control Power and protection LED indicators Line and speaker level inputs Damping factor 125+ Type: Amplifiers RMS Power: 50W x 4 @ 4 ohm Frequency Response: 12Hz - 22KHz Model #: EV4.400 Item #: 9SIA0WY9YZ2509 Return Policy: View Return …
40. This increased internal volume has enabled Q Acoustics to gain an extended low frequency response from the ported design so that more-than-ever the smaller enclosures in the range belie their diminutive stature with an impressively large-scale sound
41. However, amplification of stethoscope contact artifacts, and component cutoffs (frequency response thresholds of electronic stethoscope microphones, pre-amps, amps, and speakers) limit electronically amplified stethoscopes' overall utility by amplifying mid-range sounds, while simultaneously attenuating high- and low- frequency range sounds.
42. A low-noise RF amplifier stage ahead of the converter stage provides enough selectivity to reduce the image-frequency response by rejecting these unwanted signals and adds to the sensitivity of the receiver. The borders of the bandwidth of this amplifier are choosen to eleminate the image frequencies.