dampers in English
another damper on reactor development was the problem of safeguards
Use "dampers" in a sentence
1. Dampers for musical instruments
2. Reroute emergency power to inertial dampers.
3. Actuator drive interfaces for dampers
4. Muffler, muffler device provided therewith, and dampers
5. Guides, dampers, actuators, Bolts, Plugs, Screws,Hangers
6. Shop Chimney pipe, caps, liners, dampers, & more
7. The dampers may be adjusted with a screwdriver.
8. Backdraft dampers (also called gravity dampers) allow airflow in one direction and prevent reverse airflow for use in exhaust or intake HVAC systems
9. Could we adjust the inertial dampers so the station would spin slower?
10. Tail rotor drive shafts, flexible couplings, bearings, vibration dampers and bearing hangers.
11. Hydraulic dampers with pressure regulated control valve and remote pressure adjustment
12. Prepare to release inertial dampers and adjust them to match the planet's gravity.
13. Nest thermostats are Compatible with zoned systems, including zoned systems with dampers
14. Gummi-Metall-Technik GmbH (GMT), manufacturer of acoustic and vibration dampers (headquarter).
15. Chimney Direct carries a full line of Chimney caps, Chimney brushes and Chimney dampers
16. Boxi is an expert when it comes with industrial gas springs and hydraulic dampers
17. Fibre for an acoustic insulating material, especially for sound dampers in compressed air devices
18. The Leopard 2 has a torsion bar suspension, and has advanced friction dampers.
19. So , installing oil dampers for this bridge is a feasible wind resistance method.
20. In addition, said unit can be combined with brake devices (11) and/or vibration dampers (17).
21. The manual dampers are adjusted when the installation is commissioned, and are cheaper than the automatic ones.
22. Dampers (60, 62, 64, 66) are provided to enable adjustment of the flow through the device.
23. On tandem axle bogies, the dampers must be positioned to minimize the oscillaton of the bogies.
24. Compatibility with zoned systems Nest thermostats are compatible with zoned systems, including zoned systems with dampers
25. Electronic controllers for controlling motorized dampers in a zoned heating, ventilating and air conditioning system
26. Guides, dampers, actuators, bolts, plugs, screws, hangers, hanging strips, profile strips, mouldings and decorative strips
27. Cages,Dampers, actuators, Bolts, Shims, Screws, Hangers, Locks,Door handles and doorknobs and lock cases
28. On the other hand, manual dampers need many more hours of adjustment, and means of flow measurement.
29. Compressors, cylinders for compressed air, compressed air maintenance units, shock absorbers, pressurised sound dampers, air pressure filters
30. Often used as feet, spacers, and vibration dampers, these Bumpers absorb shock to prevent damage to equipment and surfaces
31. On groups of axles, the dampers shall be positioned to minimise the oscillation of the groups of axles.
32. The building contains two tuned mass dampers on the (hidden) 71st floor on opposite corners of the building.
33. An amount of air jetted from the distribution chambers is adjusted by changing openings of dampers (15).
34. Fire dampers of metal, smoke dampers of metal, ventilation gratings, ceiling air vents, slatted vents, floor vents, window parapet induction vents, swirl vents, induction swirl vents, ventilation valves, jalousie shutters, weatherproof gratings, airtight steel doors, ceiling vents with particulate air filters
35. Fire dampers of metal, smoke dampers of metal, ventilation gratings, ceiling air vents, slatted vents, floor vents, window parapet induction vents, swirl vents, induction swirl vents, ventilation valves, jalousie shutters, weatherproof gratings, airtight steel doors, ceiling vents with particulate air filters, flexible connection boxes, included in class 6
36. Commercial Backdraft Dampers A commercial Backdraft damper is a gravity damper (when non-motorized) allowing airflow in one direction only
37. In addition to mechanical dampers also active damping methods serve as suitable alternative to dampen torsional vibrations at test benches.
38. 11/ 00 Arrangements of valves or dampers after the fire 11/ 02 . for reducing draught by admission of air to flues
39. - the longitudinal air velocity shall be monitored constantly and the steering process of the ventilation system (dampers, fans, etc.) adjusted accordingly.
40. OSCILLATION DAMPERS WHOSE EFFICIENCY DEPENDS ON TEMPERATURE MUST BE FITTED WITH AN AUTOMATIC COMPENSATOR OR AN EASILY ACCESSIBLE MANUAL ADJUSTMENT DEVICE .
41. — the longitudinal air velocity shall be monitored constantly and the steering process of the ventilation system (dampers, fans, etc.) adjusted accordingly.
42. the longitudinal air velocity shall be monitored constantly and the steering process of the ventilation system (dampers, fans, etc.) adjusted accordingly.
43. TWO Axion 1 oz Weights; ONE Axion Dead Quiet Hybrid Damper; THREE Axion Dead Quiet Hybrid Mini Dampers; Elevate Inline Pro Hybrid 8″
44. Backdraft dampers can either be operated by gravity (where pressure or velocity opens and closes the damper) or motorized to open and close when required.
45. - The longitudinal air and smoke velocity shall be controlled constantly and the automatic steering process of the ventilation system (dampers, fans, etc.) adjusted accordingly.
46. Other changes included the provision for external fuel carriage in drop tanks, flame arrestors/dampers on engine exhausts, and redistribution of some radio equipment.
47. Viscous damping wall is a new type of viscous dampers which recently be used for its flexible distribution, large damping force and notable energy-dissipating effect.
48. Hydraulic and gas hydraulic, manual, electronic or in other form adjustable and non-adjustable single and multiple cylinder vibration dampers and parts for these devices
49. The Cedrat Technologies' experience in developing smart control systems has made possible the wider use of piezoelectric dampers for reducing noise produced by industrial activities.
50. In Active structural acoustic control (ASAC), minimisation of noise emissions is achieved by modifying the machine's vibrations using dampers directly attached to the vibrating components.