autoclaving in English
The solutions and leaves were then autoclaved , and the electrolyte content was measured again.
Use "autoclaving" in a sentence
1. Autoclaving Polycarbonate is autoclavable, but Autoclaving will cause the material to lose strength
2. Procedures for Decontamination by Autoclaving
3. Requirements for Decontamination by Autoclaving Summary: Steam sterilization (Autoclaving) is one of the most effective methods for decontaminating biohazardous material
4. Polystyrene Beakers are not recommended for autoclaving
5. Practical guide to safe Autoclaving Ravikrishna S
6. Face-shield and liquid-resistant apron when Autoclaving …
7. Autoclaving is the most effective and reliable means of sterilizing laboratory materials. Autoclaving sterilizes material using saturated steam under pressure (“moist heat”).
8. Autoclaving uses high-pressure stream to achieve reliable sterilization
9. Effective Autoclaving will depend on time, temperature, and steam penetration.
10. Autoclaving is a sterilization method that uses high-pressure steam
11. Autoclaving is the method of choice for decontaminating cultures, glassware, and pipettes
12. Also, can plastic be Autoclaved? Not all plastic materials are safe for autoclaving
13. A pressure cooker works just as well as Autoclaving, especially for small batches
14. Safe Autoclaving with the Virus Protection Shield Sterilizers for hospitals, dental & medical clinic
15. Autoclaving is one of the commonly used methods of sterilization in the medical world
16. Amusiveness anovulation anovulatory antitussive antiviruses appulsively arboviruses argumentive attributive attuitively audiovisual autoclaving autogravure autoreverse
17. Because of the physical hazards (e.g., heat, steam, and pressure) associated with Autoclaving, e
18. Autoclaving is one of the most rigorous and widely employed sterilization methods for medical devices.
19. Synonyms for Autoclaving include sterilising, sterilizing, cleaning, disinfecting, purifying, decontaminating, fumigating, sanitising, sanitizing and pasteurising
20. Repeated Autoclaving will shorten the life of reusable polycarbonate products such as bottles and centrifugeware
21. Tissues obtained at postmortems can also be used after preliminary sterilisation by boiling or Autoclaving
22. Wrap instruments for Autoclaving either individually or in sets and label packaging with staff member's initials
23. The Autoclaving process takes advantage of the phenomenon that the boiling point of water (or steam) increases when it …
24. Autoclaving is one of the most commonly used methods in the laboratory for the purpose of decontamination
25. Autoclaving, sometimes called steam sterilization, is the use of pressurized steam to kill infectious agents and denature proteins
26. The Autoclaving process works by the concept that the boiling point of water (or steam) increases when it …
27. Moist heat (autoclaving and blanching) was the most effective treatment in reducing the mAb 4C10 detectable Amandin immunoreactivity
28. Autoclaving is more effective than UV irradiation because it can eliminate short fragments of Contaminating DNA more effectively
29. When Autoclaving liquids in Pyrex® containers, do not fill more than 2/3 full and do not seal the container
30. 22 The endoscopes were sterilised after each examination according to local standards; the biopsy forceps were sterilised by autoclaving.
31. Sterikon® plus Bioindicator for checks on autoclaving - Find MSDS or SDS, a COA, data sheets and more information.
32. The most common method of treatment, Autoclaving, is a safe and effective way to protect communities and the environment
33. Autoclaving is the most effective method of sterilizing the lab equipment specially for liquid handling products to kill harmful bacteria, viruses, fungi, and spores
34. Autochthonies autochthonism autochthonous autochthonous ideas autochthonous malaria (current term) autochthonous parasite autochthonously autochthons autochthony: autocide autocides autoclasia autoclavability autoclavable autoclave autoclaved autoclaves autoclaving autocleavage
35. THE ELEMENTS OF BACTERIOLOGICAL TECHNIQUE JOHN WILLIAM HENRY EYRE After use the jars and tripods are sterilised either by chemical reagents or by Autoclaving
36. Gentamicin is one of the few heat-stable antibiotics that remain active even after autoclaving, which makes it particularly useful in the preparation of some microbiological growth media.
37. For this purpose, the allergenic characteristics of lupine seeds after boiling (up to 60 min), Autoclaving (121 degrees C, 1.18 atm, up to 20 mi …
38. Steam sterilization (Autoclaving) is the most widely used method for sterilization and is considered the most robust and cost-effective method for sterilization of medical devices
39. When Autoclaving, specific requirements must be met in order to ensure proper inactivation and include:-Use of appropriate cycle time and temperature-Use of monthly validation (biological indicator)-Use of
40. Autoclaving; besides minimal PPE for lab work (lab coat, clothes that cover legs, closed shoes) is required at all times: Latex gloves when handling potentially contaminated materials
41. Autoclavable autoclave autoclaved autoclaving autocrine autocytolyses autocytolysis autodigestion autoecious autoecism autoerotic Autoerotically autoeroticism autoerotism autogamies autogamous autogamy autogenic autogenies autogenital autogenous autogenously autogeny autognoses autognosis autograft autohaemolysin
42. Autoclavable autoclave autoclaved autoclaving autocrine autocytolyses autocytolysis autodigestion autoecious autoecism autoerotic autoerotically autoeroticism autoerotism autogamies autogamous autogamy autogenic Autogenies autogenital autogenous autogenously autogeny autognoses autognosis autograft autohaemolysin
43. Autoclaving A method for treating medical waste to render it noninfectious to humans, by heating it to 140ºC (284ºF), after which the waste can be safely disposed of …
44. Autoclaving for 60–90 min at 121 °C (15 psi), depending on the loading conditions, to achieve a waste temperature of at least 115 °C for 20 min is recommended
45. Autoclaves are machines that make use of pressurized steam in order to eliminate microorganisms. Autoclaving is considered the most reliable system for the sterilization and decontamination of reagents, laboratory glassware, waste and other media
46. Autoclaving (121 °C, 15 minutes) in moist heat is convenient but requires a loose closure, to allow the steam to replace all the air during the temperature rise, and to prevent plastic bottles from collapsing when cooling
47. Autoclaving is a popular alternative medical waste treatment method in low-income countries.It is done in closed chambers where both heat and pressure are applied over a period of time to destroy all microorganisms that may be present in healthcare waste before landfill disposal.
48. Andersen Protocols August 2014 - Sarah Giuliani Sterilizing Liquids and Labware Using the Autoclaves Caution: Before Autoclaving anything, make sure the material is autoclave-safe! If you are sterilizing EMPTY, dry glass labware, autoclave-safe plastic labware, foil- wrapped items, or any other NON-LIQUID item, follow the steps here: