annealed in English

verb
1
heat (metal or glass) and allow it to cool slowly, in order to remove internal stresses and toughen it.
The heat of welding will anneal the copper in the heat-affected area adjacent to the weld and reduce the strength provided by cold working.

Use "annealed" in a sentence

Below are sample sentences containing the word "annealed" from the English Dictionary. We can refer to these sentence patterns for sentences in case of finding sample sentences with the word "annealed", or refer to the context using the word "annealed" in the English Dictionary.

1. Annealed synonyms, Annealed pronunciation, Annealed translation, English dictionary definition of Annealed

2. Soft Annealed wire, is also written as soft Annealed iron wire, Annealed iron wire or oxygen-free Annealed iron wire

3. Our AISI 1050 Annealed spring steel …

4. Annealed - Translation to Spanish, pronunciation, and forum discussions

5. Annealed glass is an economical choice

6. Commonly Stocked Annealed Spring Steel AISI 1050

7. Auto Tie Stem/Carrier Wire – Black Annealed Baling Wire

8. Copper can be Annealed, although the process is slightly different

9. Nanoporous Pd (annealed at Ar atmosphere) [17] and nanoporous Au (annealed at air atmosphere) [18] were unstable at high temperature, whose ligaments Coarsen remarkably as …

10. Measurement of ‘initial relative permeability’ must be performed on fully annealed materials.

11. Other metals can be Annealed based on grade and type.

12. Visit our 304L Annealed section to see if there's something that …

13. We use advanced equipment to produce high quality soft Annealed iron wire for weaving wire mesh and wire cloth, and we also process Annealed wire into binding wire or

14. Grade 410 stainless steel Annealed—also known as 410 SS Annealed—is a viable material solution for applications where some corrosion resistance is necessary, but wear resistance is critical.

15. One common application for Annealed wire is as baling wire or tie wire

16. ‘copper tubes must be Annealed after bending or they will be brittle’

17. Annealed glass breaks into large shards, and tempered glass breaks into tiny pieces

18. Annealed seamless stainless steel tubing is suitable for applications demanding higher strengths and tighter tolerances

19. Automatic Baling Wire – Continuous black annealed wire for use with horizontal Baling machines

20. Our Annealed spring steel is available in thicknesses ranging from 0.010 to 0.187

21. Alpha and α–β alloys are typically Annealed in the temperature range of 700–900°C, while β alloys are normally Annealed in the temperature range of 690–815°C

22. Deeply drawn parts are often specified as fully Annealed, tempered or dead soft product.

23. The substrate surface is then annealed to completely dissociate and activate the boron clusters.

24. Most Atomized powders are annealed, which helps reduce the oxide and carbon content

25. Annealed glass, also known as float glass, has been slowly cooled once it has been formed

26. The implanted ions are annealed in an inert atmosphere at a temperature greater than 1650°C.

27. That basic difference in heating and cooling makes tempered glass stronger that its Annealed counterpart.

28. The heat treating process is known as annealing and the resulting metal is known as soft Annealed copper

29. 0.33 pounds per sheet 302 / 304 Annealed .0025 X 23" X 24" Stainless Steel Sheet

30. 37 rows  · Generally speaking, most stock shapes are Annealed after molding using a proprietary …

31. We produce the annealed wire with high - quality low carbon raw materials through wire drawing, anneal process.

32. Without a seam or weld point, this Annealed tubing can withstand higher pressure and resist corrosion

33. After deposition, the anode material and metal are annealed to form a uniform metal-semiconductor alloy layer.

34. The Annealed condition is the softer and formable condition and is best used when forming is needed

35. The polymer layer may also be optionally heated, thermally annealed, and/or exposed to UV actinic light.

36. Can't find the 304 Annealed coil you're looking for? Try 304L instead! Type 304L is a low carbon (.03 max) version of Type 304 that facilitates welding, but can often be used in place of 304 Annealed in most applications

37. Annealed spring steel can be utilized in any number of applications, making it an exceptional general use steel

38. Annealing is the most commonly used for treating metals, but other materials, including glass and plastics, can be annealed.

39. It is commonly available in pre-tempered grade such as 6061-O (Annealed), 6061-T4 and 6061-T6 grades

40. 4140 Heat Treated (HT) – 4140 Annealed 4140 Heat Treated (HT) Alloy Steel 4140 Heat Treated is a chromium-molybendium alloy steel

41. RMP Knife Blade Steel - 1095 High Carbon Annealed Steel, Knife Making Billet, 1.5 Inch x 12 Inch x 0.187 Inch

42. For projects that are on a tighter budget, Annealed glass is much less expensive than tempered glass or other alternatives

43. Subjected to heat treatment cycles to facilitate the martensitic transformation process (solution annealed stage) and subsequently age hardened (precipitation hardened stage).

44. It is easy to Anneal brass but more difficult to get all brass Annealed to the same grain structure/hardness

45. Aluminum is commonly Annealed to allow for extreme forming and drawing operations that would otherwise cause cracking or tearing in the metal

46. When you are wanting to add glass to a décor product, you will likely prefer Annealed glass because it …

47. It can be bought in several ways and has many names such as:, Black Annealed Baling Wire, Single Loop Baling Wire, Galvanized Baling Wire, Painted

48. Annealed In English, many past and present participles of verbs can be used as adjectives. Some of these examples may show the adjective use

49. When a constant field in the 10 V cm−1 range is applied to annealed anodic oxide films the ion current builds up in accelerating fashion.

50. Photographic small angle X-ray diffraction techniques provided considerable qualitative information, concerning the morphological features of these elastic materials both “as extruded”, annealed and during extension.