repeatability in Czech

epeatability <n.> opakovatelnost Entry edited by: B2

Sentence patterns related to "repeatability"

1. coefficient of variation of repeatability

2. Two assumptions: repeatability and Coterminated

3. This ensures repeatability of your custom Ampoules.

4. While good at repeatability, robots are poor in absolute accuracy.

5. a. A "bias" "repeatability" of less (better) than 1 250 micro g; and

6. The errors of the analytical methods (repeatability and reproducibility) are presented.

7. A "bias""repeatability" of less (better) than 1 250 micro g;

8. Control system performance verification should include speed of response, accuracy, and repeatability.

9. The repeatability test should include an acceptable number of replicate injections (i.e., five or six).

10. The Liquid Mass Flow Meters will convince you through impressive measurement speed and extremely high measurement repeatability.

11. This number of trials for process modelling and repeatability was kept to the absolute minimum required.

12. Biliverdin recovery from goose feces was low (26%), but the repeatability was high (less than 10% of C.V.)

13. To benefit from the sensitivity and repeatability of the autocollimators, while eliminating their errors of accuracy, a null-balance method has been used.

14. 13 rows  · using a Borazon grinder wheel during sharpening guarantees the repeatability of the blade …

15. In addition, in the present invention the repeatability of said manufacturing process of polymer particles may be kept superior.

16. MINICOLOR and SPECTROCOLOR series dosing and mixing units, provide efficient volumetric dosing and homogeneous mixture with highest accuracy and repeatability.

17. The Barcoded Magnetic Beads are produced by photo lithography so they are inexpensive to manufacture and are produced with a very high degree of repeatability

18. This was demonstrated by the absolute deviations between the systems as well as by some improved repeatability of the partial flow system with respect to particulate matter measurement

19. The influence of the parameters of the GC system and the accuracy of the determination of index values, characterized by the “repeatability” and the “reproducibility”, are discussed.

20. Progressive Coining of metal components ensures high process repeatability while maintaining the tightest tolerances and improved efficiency, leading to shorter lead times and lower manufacturing costs.

21. This was demonstrated by the absolute deviations between the systems as well as by some improved repeatability of the partial flow system with respect to particulate matter measurement.

22. As Bruvs use grows in its application to provide data relevant to sustainable management, marine protected area success, and overall reef health, understanding repeatability of sampling results is vital.

23. 12 The effects of the method repeatability, sample mass, standard titrate solution and enviroment temperature on the uncertainty of PTA acid value determined with titrimetry were assessed and discussed.

24. Installed in the field or on-line as an individual analyzer or part of an analytical system, Emerson gas Chromatographs provide superior accuracy and repeatability across a wide dynamic range of components (from percent to trace-level) for Process and Natural

25. Coterminated ASSUMPTION • A finite and identical study period is used for all alternatives • This planning horizon, combined with appropriate adjustments to the estimated cash flows, puts the alternatives on a common and comparable basis • Used when repeatability assumption is not applicable • Approach most frequently used in