1. A display apparatus comprises a display panel; a resolution adjustor adjusting a resolution of a video signal and outputting the adjusted video signal and a pixel clock signal; a frequency adjustor adjusting a frequency of the pixel clock signal outputted from the resolution adjustor; and a controller controlling the frequency adjustor to adjust the frequency of the pixel clock signal in a blank range so as to correspond the number of the pixel clock signal from the resolution adjustor for a frame to the predetermined number.

2. In frequency modulation (FM) the frequency of the radio signal is varied slightly by the audio signal.

3. Configuration for the digital-analog conversion of a high-frequency digital input signal into a carrier-frequency analog output signal

4. Audible alarm signal device with frequency modulation:

5. Audio and video signal analog-to-digital converter audio and video signal digital-to analog converter

6. 9.2.3.2. Audible alarm signal device with frequency modulation:

7. An amplitude-modulated signal has frequency components both above and below the carrier frequency.

8. Circuit for producing a measurement signal for the frequency of an alternating current signal

9. Automatic frequency control circuits mix an attenuated portion of the transmitted signal with the local oscillator signal to form an IF signal. This signal is applied to a frequency-sensitive discriminator that produces an output voltage proportional in amplitude and polarity to any change in IF-frequency.

10. Method and apparatus for decoding video signal

11. Method and apparatus for processing video signal

12. Inter-layer prediction method for video signal

13. The carrier pulses of the pulse frequency modulator were frequency modulated by the input analog signal.

14. Similarly, the frequency adjusted clock signal lags the synchronizing clock signal by a DFS output delay.

15. A digital power amplifier (DPA) generates a radio frequency (RF) signal based on the upconverted signal.

16. Dunlop monitored the frequency of the signal on the wire.

17. In fact, Aliasing is the phenomenon in which a high frequency component in the frequency-spectrum of the signal takes identity of a lower-frequency component in the spectrum of the sampled signal

18. When a transmitter broadcasts an NTSC signal, it amplitude-modulates a radio-frequency carrier with the NTSC signal just described, while it frequency-modulates a carrier 4.5 MHz higher with the audio signal.

19. Method and apparatus for processing a video signal

20. Multilayer video signal encoding/decoding method and device

21. Audio and video signal digital-to-analog converter

22. None, but we're receiving an analog video signal.

23. Audio and video signal analog-to-digital converter

24. Television and video signal processing apparatus and instruments

25. Integrated circuit. Record video signal processor for VCR.

26. The original video signal is processed and transferred by the video processor to the LED video wall.

27. If there are enough stages in the amplifier, at some frequency, the output signal will lag behind the input signal by one cycle period at that frequency.

28. This radio signal has a frequency of 800000 cycles per second.

29. The Nyquist frequency of a 1.544 megabaud signal is 772 kHz.

30. The amplitude modulation signal is separately dealt with in a low-frequency portion and a high-frequency portion.

31. 1 analogue output, software-controlled, with an optional frequency/signal generator.

32. Adaptable filter and method for filtering a radio frequency identification signal

33. The transformed signal provides information about the time and the frequency.

34. The scanner emits a low frequency radio signal, activating the microchip.

35. The low-power frequency divider generates a frequency-divided signal with frequency equal to the frequency of the input signal divided by a fixed ratio, and is equipped with a phase-voltage converter, a comparator, a phase-locked loop and a reset circuit.

36. A tuner (101) has a dual AGC function, and frequency-converts an input signal into an IF signal.

37. The electrical control signal frequency is a narrow frequency band, and the coupling parameters are selected to match the modulator frequency band of operation.

38. Full resolution stereoscopic video with 2d backward compatible signal

39. Cctv Cameras, Analog Security Camera (CVBS) Cctv cameras are a type of security camera that uses an analog video signal (CVBS / Composite Video Baseband Signal) to capture video surveillance footage

40. Method and apparatus for encoding/decoding multilayer video signal

41. Broadcast signal receiver and method for processing video data

42. Signal is in low frequency, while noise in high frequency and minutia in image is also in this area.

43. The test signal has the same frequency as the AC supply voltage.

44. Video inputs include actual display light; sensing of display light; and the video display signal.

45. When playback is complete, the time-compressed signal is replaced with the original input video signal.

46. Device and method for converting a charge-flow into a frequency signal

47. The transmitted signal of these equipments is constant in amplitude and frequency.

48. Modules containing demodulators, audio-video signal tuners and integrated circuits

49. A preprocessor (12) constructs interlaced scanned video signal from the non-interlaced scanned video signal by selection of alternate lines of successive non-interlaced image signals.

50. The adaptor may include other features for preventing unauthorized use of protected content, for example authenticating the source of a content signal before providing an output video signal, encrypting the output video signal, responding to commands to renew or revoke cryptographic keysets, and embedding forensic tracking information in a video signal.

51. The transmitted signal is constant in the amplitude but modulated in the frequency .

52. Setting such pulse frequency to a low level acoustic noise frequency allows the signal-to-noise response to be greatly increased.

53. AC coupling allows removal of common mode signal in a desired frequency range.

54. When a tag Backscatters an excitation signal, modi˙es the three degrees of freedom of a signal: amplitude, phase, and frequency

55. The actual excitation signal can be extracted from the spectrum of the amplitude-modulated carrier signal, for example by suitably selecting the frequency of the carrier signal.

56. Radio frequency (RF) and intermediate frequency (IF) transceiver circuit assemblies, and analog and digital signal processing circuit assemblies for wireless communication apparatus

57. 19 The reflected signal is studied as a function of frequency and the resonant frequency, together with higher orders, is then measured.

58. Bandwidth (countable and uncountable, plural Bandwidths) The width, usually measured in hertz, of a frequency band. quotations ▼ (of a signal) The width of the smallest frequency band within which the signal can fit

59. The method may be used in frequency or time diversity systems or for demodulating a frequency-hopping spread spectrum signal without a priori knowledge of the frequency-hop pattern.

60. Method and apparatus for processing broadcasting signal for panorama video service

61. Television set for selectively processing a composite signal colour correction (cscc) or a signal split into a composite video signal and a chrominance carrier

62. The coupling factor (k), multiplied by the rpm or the appropriate sensor-signal frequency, gives the amplitude of the sensor output signal.

63. The notch filter (92) attenuates the spurious signal whose frequency is adjusted to f1.

64. of said signal and calculating the relative or absolute density from the measured frequency.

65. Analog: 1) In telecommunications, an Analog signal is one in which a base carrier's alternating current frequency is modified in some way, such as by amplifying the strength of the signal or varying the frequency, in order to add information to the signal

66. Apparatus for timing recovery of vestigial sideband (VSB) modulated signals including a narrow band pass filter (28) adapted to receive a baseband VSB signal (26) having a positive-frequency signal edge (30) and providing a portion of the positive-frequency signal edge (30).

67. The divider generates a frequency divided enable signal that is communicated to the latch.

68. This carrier wave usually has a much higher frequency than the input signal does.

69. A consumer digital video cassette recorder (210) may record an advanced television signal having an MPEG like signal format.

70. When low frequency signal travels through atmosphere, its velocity changes due to atmospheric disturbances.

71. If it is a low frequency sound, it is processed as an analog signal.

72. An RF/video transmitter generates an RF/video signal in a third segment from among the spectrum segments.

73. When one tile is missing or broken the video signal is not completely displayed by the video wall.

74. Short stubs (16), which interrupt the transmission of a low-frequency signal (SL), are connected to the high-frequency power supply lines (8).

75. A preprocessor (12) constructs (2:1 60Hz) interlaced scanned video signal from the non-interlaced scanned video signal by selection of alternate lines of successive non-interlaced image signals.

76. Method and system for removing channel interference signal that occurs due to a frequency offset in an orthogonal frequency division multiple access system

77. Here is a nifty video that demonstrates Aliasing in a music signal.

78. A consumer digital video cassette recorder (210) may record an advanced television signal (09) having an MPEG like signal format.

79. An acceleration signal generating unit (11) receives the machine velocity (vm) of a driving machine and outputs a low-frequency acceleration signal (af).

80. Mixed-signal and radio frequency integrated circuit designers are often confronted with noise-coupling issues.