water-to-air ratio in Vietnamese

@Chuyên ngành kỹ thuật
@Lĩnh vực: xây dựng
-hệ số tưới

Sentence patterns related to "water-to-air ratio"

Below are sample sentences containing the word "water-to-air ratio" from the English - Vietnamese Dictionary. We can refer to these sentence patterns for sentences in case of finding sample sentences with the word "water-to-air ratio", or refer to the context using the word "water-to-air ratio" in the English - Vietnamese Dictionary.

1. The minimum volumetric air to water ratio at peak water flow should be 25:1.

2. Air flow and air-to-fuel ratio measurement:

3. Air flow and air to fuel ratio measurement method

4. Air flow and air-to-fuel ratio measurement method

5. excess air ratio

6. The target air/fuel ratio is alternately switched between a set rich air/fuel ratio and a set lean air/fuel ratio.

7. relative air/fuel ratio

8. The air/fuel ratio of an air/fuel mixture is oscillated, relative to a target air/fuel ratio, in a preset amplitude lean or rich of the stoichiometric air/fuel ratio.

9. Stoichiometric air/fuel ratio

10. = relative air / fuel ratio

11. Modulating air/fuel ratio

12. Engine Air/Fuel Ratio

13. stoichiometric air to fuel ratio, kg/kg

14. Calculation method using air mass flow and air-to-fuel ratio

15. stoichiometric air/fuel ratio (kg/kg

16. stoichiometric air/fuel ratio (kg/kg)

17. In short, the mixing ratio is the number of grams of water vapour per kilogram of dry air.

18. is the instantaneous excess air ratio

19. The ratio of salt water to fresh water on Earth is around 40 to 1.

20. when a gas reaches a broad band air-fuel ratio sensor (26) and a third air-fuel ratio Af¿n?

21. The target rich air-fuel ratio (afRich) and the target lean air-fuel ratio (afLean) are varied in accordance with an intake air amount (Ga).

22. For the mole ratio of water to Anhydrate 1:2.

23. Their ratio tells us the water temperature.

24. The dilution ratio is calculated from the dilution air flow rate and the split ratio.

25. Key words: durability, freeze–thaw cycle, silica fume, scaling, curing, spacing factor, water/cement ratio, compressive strength, cement type, entrained air, aggregate.