involute serrations in Vietnamese

@Chuyên ngành kỹ thuật
-then hoa thân khai
@Lĩnh vực: cơ khí & công trình
-răng nhỏ thân khai

Sentence patterns related to "involute serrations"

1. 2 Involute Spline is one having teeth with involute profiles.

2. 21 The surface obtained when every point on the edge generates an involute is called an involute helicoid .

3. 8 To model involute gears accurately, a formula for calculating the involute curve of gear profile is presented.

4. Convolute is a see also of involute

5. As verbs the difference between Convolute and involute is that Convolute is to make unnecessarily complex while involute is to roll or curl inwards

6. The involute progression of hallucination is strange.

7. But they were sharp, with deadly serrations, just like a shark's.

Nhưng chúng bén với các đường răng cưa chết người, giống cá mập.

8. The teeth were small and peg-like, and lacked any serrations.

9. 6 The involute progression of hallucination is strange.

10. 16 This process heightens the use results of involute spline broach.

11. 12 Involute curve contour lines is an important one machine parts.

12. 4 All transmission clutches are of involute spline type.

13. This process heightens the use results of involute spline broach.

14. 3 Basic circle is the circle which forms involute.

15. Both the evolute and involute of a Cycloid is an identical Cycloid.

16. 1 We invent the spherical gear with ring involute tooth.

17. The Apx’s aggressive full length slide serrations make slide manipulations easy under any conditions

18. There were 31 to 41 serrations on the front edges, and 29 to 33 on the back.

Có 31 đến 41 răng cưa trên các cạnh phía trước, và 29 đến 33 ở cạnh sau.

19. 5 Cycloid was used to modify the involute tooth profile.

20. In the two-pass operation, serrations and one end radius were Broached on the first pass

21. 13 Involute spindle spindle: ideal bearing capacity and easy assembling and dismantling.

22. 9 The involute gear transmission precision hard - toothed surface device has dominated.

23. Then the part was rotated 180°, and the remaining serrations and radii Broached to …

24. Serrations (10) produce notching in the wire, thus facilitating bending and improving the soldering properties.

25. 7 The optimum design method of involute internal gear slotting cutter is introduced.