flange angle iron of beam in Vietnamese

@Chuyên ngành kỹ thuật
@Lĩnh vực: xây dựng
-thép góc cánh của dầm
@Chuyên ngành kỹ thuật
@Lĩnh vực: xây dựng
-thép góc cánh của dầm

Sentence patterns related to "flange angle iron of beam"

Below are sample sentences containing the word "flange angle iron of beam" from the English - Vietnamese Dictionary. We can refer to these sentence patterns for sentences in case of finding sample sentences with the word "flange angle iron of beam", or refer to the context using the word "flange angle iron of beam" in the English - Vietnamese Dictionary.

1. Flange angle

2. — Flange height, thickness and angle

3. Flange height, thickness and angle

4. Prefabricated h-beam having reinforced flange strength

5. Beam angle (degrees)

6. Angle Flange Standard. Flat Flange: Specify hole pat-tern. If no drawing provided, flange will be blank.

7. Coped to clear the supporting beam flange (see Figure 1)

8. Nominal beam angle in degrees;

9. LED light source beam angle

10. light beam at shallow angle

11. light beam at steep angle

12. Beam angle in degrees, or the range of beam angles that can be set

13. Whether it is a Wide Flange beam or a Standard I-Beam, Saginaw stocks all the common sizes along with the hard to get items.Our Wide Flange beam inventory includes sizes from 4” up to 44” wide Beams

14. Optical angle detector having a beam-forming element

15. BestEquip Push Beam Trolley, 2200lbs Load Capacity Manual Trolley, 1Ton I-Beam Trolley, Heavy Duty Beam Trolley Hoist w/Dual Track Rollers, 2.5in - 7in Adjustable Flange for …

16. In some cases, the bottom flange must be Coped to clear the supporting beam flange or to allow the beam to be dropped between two angles, as shown for the knife connection in Figure 2

17. A maximum beam steering angle of twice the angle of deviation may be achieved in any direction.

18. The angle of the light beam of the dipped-beam headlamps shall be determined under the following load conditions:

19. The angle of the light beam of the dipped-beam headlamps shall be determined under the following load conditions

20. The beam angle of the light plays a decisive role here.

21. Furthermore, interference between the reflected beam and other converted beam is avoided due to the angle of reflection.

22. It was found that the joint capacity (i) depends on the dovetail height, with an optimum of approximately 2/3 of the beam height and (ii) can be considered almost independent of the flange angle.

23. The gravity referenced angle sensors (clinometers) measure the angle of the mast/feed beam relative to gravity.

24. The reflector tube is tiltable for adjustable beam angle.

25. The angle of the light beam from the dipped-beam headlamps shall be determined under the following loading conditions;