compressive strength in Germany

compressive strength [kɔmpresivstreŋθ] Druckfestigkeit

Sentence patterns related to "compressive strength"

1. Compressive Strength Testing of Plastics

2. Laboratory testing included sieve analyses and unconfined compressive strength testing.

3. Autogenous deformations, internal relative humidity and compressive strength were recorded.

4. Therefore, knowing the Compressive strength is uttermost important for the designer.

5. Abrasion resistance has close proximity to the compressive strength of concrete

6. Compressive strength is the parameter that represents the concrete in the structural design

7. CONCLUSIONThe Compressive strength of all the three mixes, that is M20, M25 and M30, increases with the addition of glass fibers as compared to Compressive strength of conventional concrete

8. Compressive Strength Properties Perpendicular to the Grain of Larch Cross-laminated Timber

9. The hardness of Anorthosite is 5-6 whereas its compressive strength is Not Available

10. The hardness of Arkose is 6-7 whereas its compressive strength is Not Available

11. Compressive strength test results of field-removed masonry units and assemblies are expected to vary from, and will likely be less than, Compressive strength test results of new masonry units and newly assembled prisms

12. Compressive strength can be defined as the capacity of concrete to withstand loads before failure

13. The hardness of Andesite is 7 whereas its compressive strength is 225.00 N/mm 2

14. The method is primarily based on the Abrams' law relating compressive strength and water–cement ratio.

15. Cube testing is also the most popular way of advertising Compressive strength on technical data sheets.

16. The Compressive strength of cement mortar cubes or concrete is one of the most important and useful property

17. The Compressive strength of the hardened cement is the essential property when water is added in the cement

18. The Compressive strength goes on increasing when the amount of glass fibers is increased in the mix.

19. Materials such as concrete and rock are often evaluated using a Compressive strength test and in these cases

20. This allows unexpected quick setting and increased early-age compressive strength without shrinkage in the cement board compositions.

21. The Compressive strength of a material is the force per unit area that it can withstand in compression

22. The Compressive strength of cement mortars is determined in order to verify whether the cement conforms to Indian Standard (IS, or other standards like ASTM, BS etc.) specifications and whether it will be able to develop the concrete of required Compressive strength.

23. Fast setting portland cement compositions with alkali metal citrates and phosphates with high early-age compressive strength and reduced shrinkage

24. Slump, ultrasonic pulse velocity, compressive strength, and surface abrasion resistance tests were performed on concretes made with these aggregate fines.

25. Compressive strength of Concrete and its importance:- As we all know that concrete is a mixture of sand, cement, and aggregate

26. The results shows that the lateral deformation was confined effectively and the ultimate compressive strength was increased, the ductility was improved.

27. Compressive strength of concrete is a destructive strength, and there is no direct relationship between measured values based on Young’s modulus

28. From the above tests, the inhibitor Admixtured concrete not only improved in compressive strength but also increased its corrosion resistance properties

29. You are probably not talking about the Compressive strength of a single particle, rather you are probably interested in the Compressive …

30. Compressive strength of IRS-T 40 Cement: It is a special type of cement which is mainly used in railway works only

31. Key words: durability, freeze–thaw cycle, silica fume, scaling, curing, spacing factor, water/cement ratio, compressive strength, cement type, entrained air, aggregate.

32. The high alkali content prepares the glass for ion exchange with bigger alkali ions in order to improve the surface compressive strength.

Der hohe Alkaligehalt bereitet das Glas für einen Ionenaustausch mit größeren Alkali-Ionen vor, um die Druckfestigkeit der Oberfläche zu verbessern.

33. The Compressive strength of a material that fails by shattering fracture can be defined within fairly narrow limits as an independent property

34. (iii) BY the addition of the Admixture, concrete with the same workability and compressive strength can be obtained at lower cement content

35. The acid resistant refractory brick has significantly improved bulk density, compressive strength, wear resistance and acid corrosion resistance, and has decreased porosity.

36. This finding sheds new light on the influence of aggregate segregation, wall effect and size of moulded specimens on the compressive strength of concrete.

37. It was found that machine stiffness has no significant effect on the compressive strength, the flexural strength, or the critical stress intensity factor.

38. The Compressive strength of the brick is the most important property of the bricks because brick is mostly subjected to compression and hardly to tension

39. Compressive strength as a concrete property depends on several factors related to quality of used materials, mix design and quality control during concrete production

40. Both compressive strength and tension strength of test specimens cured with CM-A are equal to or a bit higher than that with wet burlap.

41. Compressive strength is the maximum load at which the specimen breaks is taken as a Compressive load represented by F or S, which is equal to ratio of Compressive load to cross sectional area of specimen,such as F=P/A, where F = Compressive strength,P = Compressive load and A = area of cross section of specimen.

42. In any case, the Compressive strength of an individual gravel particle, if it is stone, is very high, often 20,000 pounds per square foot or higher

43. Compressive strength testing procedures for concrete masonry units and other related products are covered by ASTM C 140, Standard Methods of Sampling and Testing Concrete Masonry Units

44. However, most of the set accelerators, except for alkali-free accelerators, failed to satisfy the specification because of greater than 40% compressive strength loss at 28 d.

45. Of the many tests applied to the concrete, the Compressive strength test is the most important, as it gives an idea about the characteristics of the concrete.

46. The strength of the concrete depends upon many factors like individual Compressive strength of its constituents (Cement, Sand, aggregate), quality of materials used, air entrainment mix proportions , water-cement

47. The cement efficiency or reactivity of two type GU cements sold in the southern Ontario market was studied using compressive strength measurements of concrete coupled with Abram's Law.

48. Compressive strength refers to the ability of a certain material or structural element to withstand loads that reduce the size of that material, or structural element, when applied

49. However, the Compressive strength of materials that do not shatter in compression must be defined as the amount of stress required to distort the material an arbitrary amount.

50. Ultimate Compressive Strength is defined as the force at which a specimen with a certain cross-section, and consisting of a particular fracturing material, fails when it is subjected to compression.